Windows from the manufacturer, compare different options. Plastic windows: customer reviews of companies

Today there are a huge number of window products on the market. Which plastic windows fall into the category of the highest quality and how do high-end products differ from cheap counterfeits? When choosing plastic windows, you need to be guided by the main characteristics and reputation of the manufacturer. The cost of products does not always correspond to their quality, since sellers often unreasonably inflate the price. Also, do not overpay for those design features that are not useful to you in your particular conditions. What do you need to know about plastic windows in order to choose a quality product?

Main characteristics of plastic windows

Plastic windows consist of the following elements:

• window block and frame (profile) made of PVC;
• double-glazed windows (glass chambers);
• seal;
• window fittings.

Each component has specifications, on which the performance of the window as a whole depends. Let us dwell in more detail on what indicators each of the elements should correspond to.

Attention!

High-quality PVC windows are produced under the control of the ISO 9001 standard and have an appropriate certificate.

Profile

The profile, made of high-quality polyvinyl chloride, is resistant to mechanical, chemical and thermal influences. Its service life is 50 years.

What indicators determine good profile from PVC? Before choosing a manufacturer, familiarize yourself with the main characteristics of the product.

• Profile width. It all depends on purchasing power. The wider the profile, the better and warmer it is. One caveat: a wide profile must have more stiffeners, otherwise the strength of the product will suffer.
• Number of thermal insulation chambers. For good thermal insulation, it is better to choose a profile with at least 5 chambers. In areas with very low winter temperatures, it is better to consider options where the chambers are filled with inert gas.
• Reinforcement. For rigidity, the PVC profile is reinforced from the inside with steel inserts. A solid contour is more durable, but if thermal insulation properties are a priority, then it is better to install windows with an open contour - they are warmer.
• Country of origin of the profile. Traditionally, German products are considered to be of high quality. But often such windows are produced in Russia using German technology. In this case, the price should be lower.

How to choose a double-glazed window?

The glass unit is selected in accordance with the requirements necessary for your conditions. Here are the designs of double-glazed windows:

• single-chamber – two glasses;
• two-chamber – three glasses;
• three-chamber – four glasses.

An important detail is the thickness of the glass and the distance between the glasses. The larger this value, the better the heat and sound insulation characteristics of the window. Average optimal thickness glass fluctuates around 4-5 mm (the outer one can be thicker than the inner one), and the distance between them is approximately 10-16 mm with a total thickness of at least 30 mm.

In addition, the cost of the window will be higher if you install glass with advanced capabilities:

• energy saving;
• armored;
• sun protection;
• reinforced;
• hardened;
• self-cleaning.

The profile color is traditionally white. If you choose poor quality PVC, it may fade in the sun and acquire a yellowish tint. In addition to white, you can install windows in other colors. In this case, the paint is applied to the surface of the profile or added directly to the plastic mass during the manufacturing process. There is an option like lamination - a colored film is glued to the profile.

What is a seal?

The seal plays a significant role in thermal insulation and participates in the drainage system, ensuring the tightness of the window. It should go along the perimeter of the valves and fit snugly to both surfaces. The following materials are used for its production:

• rubber;
• silicone;
• special rubber;
• rubber plastic.

The material must be elastic, soft, but resilient, resistant to external influences. It is better to install a seal made of ethylene-propylene-thermopolymer rubber (EPDM).

Choosing accessories

The fittings ensure the opening of the window sashes. Installing good fittings means extending the service life of the window as a whole and protecting yourself from unpleasant surprises. The opening mechanism can be simple - rotary, or more complex - tilt-and-turn; with slot opening (winter ventilation). High-quality fittings are made from high-strength alloy steel. At the client's request, the windows can be equipped with anti-burglary fittings, handles with locking and locking, and hidden anti-drilling linings.

Good fittings are resistant to corrosion, have a smooth operation and optimal ratio metal and plastic in construction.

The leading manufacturers of accessories for plastic windows include the following companies:

• Siegenia-Aubi;
• Roto;
• Maco;
• Winkhaus.

Window design

The cost of PVC windows directly depends on their design. There are rectangular and square windows, you can install profiles in the form of arches and semi-arches, hinged and sliding models, with fixed and opening sashes. Big size windows are mounted from several glasses, separating them with strips of glass to give strength aluminum profile. Modern manufacturers are ready to fulfill any whim, of course, for your money. The more non-standard window you want to install, the more opening and turning mechanisms it has, the higher the final cost of the product will be.

Manufacturers and prices

Which manufacturers are considered the best? In Russia, about ten companies engaged in the production of PVC windows have proven themselves well. Products of both domestic and foreign origin are in demand. All of them occupy their niche in terms of price-quality ratio, which makes it easy to choose the appropriate option.

• VEKA profile, Naro-Fominsk district, Gubtsevo village. The products have been awarded the German quality mark, and production control is carried out under the auspices of European technologies. The undoubted advantages of VEKA windows include stable quality and a wide range of products. The disadvantages are the high cost, which is determined not so much by the quality as by the brand.

• REHAU profile, Gzhel. Today, the company is a leader in the Russian sales market in terms of the number of products produced. pros REHAU profile: high quality and manufacturer's guarantees, a large assortment products. The disadvantages include the high cost of the products.
• KBE profile (KBE), Voskresensk. Another German company engaged in production in Russia. At the same time, along with the high quality characteristic of the first two manufacturing companies, the KBE profile today has a slightly lower price, which is explained by successful marketing moves.

These manufacturers occupy leading positions in the plastic window market. In addition to them, the following companies are included in the top 10 with varying degrees of success.

• Profile SALAMANDER, Türkheim, Germany. Pros: European quality control, control of dealers by the manufacturer, profile design. Cons: cost of production.
• Profile "Mont Blanc", Elektrostal. The advantages include: low cost, large assortment, quality products. Disadvantages - no ISO certificate.
• Profile Kaleva, Moscow. Pros: excellent design, full production cycle. Cons: no quality management certification.
• Profile Proplex, Podolsk. This is a Russian company that has created a full production cycle. Advantages of the profile: low cost. Disadvantages: outdated designs, lack of international certification.
• Profile Deceuninck, Belgium, branch - Protvino.
• SOK profile, Syzran. The company does not have its own profile, but produces it at the plant of the Profine concern (KBE). Windows are characterized by traditionally high European quality, but a small selection and unreasonably inflated cost of finished products.

In general, the question “which windows are best to install?” there can be no clear answer. It all depends on the conditions in which they will be used. For residential premises, in areas with low winter temperatures, more expensive designs are chosen, and in other cases you can save on the number of cameras and double-glazed windows, fittings and characteristics of the glass. Before installing windows, they determine for themselves the characteristics that they must meet and turn to leading manufacturers who have a good reputation and all the relevant documents on quality standards.

When old wooden structures loose, covered with a thick layer of cracked paint, they are unable to retain heat and provide airtightness. Naturally, the question arises: “Which windows are best to install in an apartment?” Plastic! The answer can only be this. However, with the current range of such products on the Russian market, it is quite difficult to make a choice. Therefore, today we will conduct a short review of manufacturers of such structures to make it easier for you to navigate this diversity.

The undisputed leader in the modern Russian market is plastic windows. The advantage of these systems is primarily associated with their excellent performance characteristics, long service life and impressive decorative properties.

Plastic windows: advantages

If you are interested in the answer to the question: “Which plastic windows are best to install in an apartment?”, you need to know about the advantages of these products. Today they are gaining increasing popularity in construction market. What did they do to deserve such recognition?

Of course, the strength of the structure. From regular window in strong winds the glass may fall out, and plastic double glazing it is securely fastened. Moreover, such products are shock-resistant.

The aesthetics of these structures cannot be ignored. They are very beautiful, a house with plastic windows seems to glow from the outside, and the rooms become much lighter.

The undeniable advantages of plastic include its lightness and the ability to create glass units of any shape. For each architectural style you can choose the appropriate option.

Equally important is the financial availability of these products. Today manufacturers from different countries They offer not only elite, exclusive types of their products, but also budget options.

Plastic profile

Main component metal-plastic window - PVC profile. It is made from polyvinyl chloride. Initially, it is a powdery material made from products with the addition of table salt. In addition, various modifiers and stabilizers are added to this powder, giving the material strength and resistance to aggressive mechanical and natural influences.

Which company is better to install plastic windows?

Today, many companies are engaged in the production of these structures, both in our country and abroad. Their choice in our time is greater than ever. Moreover, these are not only respected, time-tested brands, but also very young companies that have yet to prove their worth and withstand very tough competition. Today we will try to present them to you so that you can answer the question: “Which company is best to install plastic windows?”

REHAU windows

The German company Rehau has been a confident leader in our market of plastic structures for many years. It was founded in 1948 and today employs more than 15 thousand employees. The first representative office in our country appeared in 1995. In 2002, our own production was opened in Russia.

The company presents six window profiles. They have a variety of characteristics and prices - from budget to luxury. The number of chambers ranges from 3 to 6. There are samples created specifically for the conditions of the Russian winter. If you are thinking about which plastic windows from which company are best to choose, reviews from happy owners of these designs will help you decide. Buyers emphasize that Rehau offers its customers environmentally friendly products.

These windows have become very popular in our country due to their affordable prices and high quality. The company's product range features a huge selection of colors and shapes.

The famous brand produces several types of double-glazed windows from different lines - DESIGN 70, EURO and BASIC DESIGN. EURO are products with increased noise insulation, protection from wind, heat and sun. The profiles are reliably protected from fading and damage from temperature changes.

The BASIC DESIGN line has lower noise and weather protection. However, the manufacturer guarantees that the windows will last more than 10 years. The prices are also encouraging, although it should be noted that they vary depending on design features models: a fixed window costs from 2.5 to 3 thousand rubles, a standard one from 8 to 12 thousand rubles.

Veka windows

If you are interested in which plastic windows from which company is better to choose, pay attention to the products of the well-known Russian brand VEKA. According to consumer reviews, the double-glazed windows of this German company firmly occupy second place in popularity.

This company was founded in 1969. It introduced nine types of profiles to the Russian market, including unique five-chamber models. The company has two operating enterprises in Russia.

VEKA windows are of the highest quality and very reasonable prices. The corporation has released several classes of its products, which have their own characteristics - colors, shapes.

A huge selection of shapes - arched, rectangular, trapezoidal and even round - distinctive feature company products. In addition, there are different stylizations and a variety of color solutions.

The most popular in our country are VEKA EUROLINE windows, which are distinguished by insulated profiles, simple shape and affordable price. VEKA SOFTLINE is a classic product with increased wear resistance, impressive appearance and sound insulation.

The VEKA ALPHALINE line is distinguished by a large selection of colors and shapes and has the most powerful thermal insulation (three-circuit). Prices for these quality windows range from 3.5 to 5 thousand rubles, depending on the line you choose.

KBE windows

Today, many people who are beginning to wonder: “Which windows are best to install in an apartment?” Plastic structures German company KBE, owned by the Profine concern, are well known on the Russian market. The brand presents five modifications - from the budget “Engine” line to the elite “Select” products.

KBE profiles have been manufactured in Germany since 1980. Today they are produced at two Russian factories: in Khabarovsk and Voskresensk. The quality of their double-glazed windows is as high as in Germany.

In the production of the company's products, energy-saving spraying and argon filling of chambers are used. The cost of such windows is from 6.2 to 8 thousand rubles.

"Samara window designs"

Today, many of our compatriots who cannot decide which plastic windows are best to install in their apartment have the opportunity to support the domestic manufacturer by choosing SOK windows. Since 1999, the company has been part of the German concern Profine. The production is located in the city of Syzran (Samara region). The fittings are manufactured by Aug. Winkhous GmbH. & Co. KG, which celebrated its 160th anniversary last year. It specializes in the manufacture of window and door mechanisms.

KBE profiles are produced not only traditional white, but are also laminated, which allows you to order models that fully match the design of your home.

The company presents profiles of three types: SOK 3, SOK 4 and SOK 5. The number indicates the number of chambers in the double-glazed windows. These designs comply with European standards. The cost of a standard window varies from 5 to 7 thousand rubles.

SALAMANDER windows

The German company SALAMANDER is represented on the Russian market with three modifications of window profiles: 2 D, 3 D and Streamline, which has rounded frames and sashes. Judging by customer reviews, the company’s products are nothing special other than traditional German quality, does not stand out.

By the way, the company produces not only windows, but also balcony pairs, as well as doors. The main advantage of this company is experience and quality. Windows from SALAMANDER undergo regular testing and meet international standards.

Prices for all brand products are much higher than those of its closest competitors. This significantly affects the demand for these products. In addition, windows from SALAMANDER are available only in white. The shapes are standard - rectangular. Prices are quite high and depend on the class of products chosen. A fixed window will cost you from 3 thousand rubles, a standard rectangular opening window - from 6 thousand rubles. Models of the elite line can be purchased for 15,000 rubles (starting price).

Deceuninck windows

Designers often help their clients solve the question “how to choose reliable plastic windows for an apartment.” Recently, they are increasingly recommending paying attention to the products of the Deceuninck concern. This is one of the pioneers in the production of PVC systems in the world. In addition, the brand became one of the founders of the Union of Manufacturers plastic profiles Russia. The concern owns the Thyssen Polymer company. It has been producing PVC windows since 1965; the company appeared on our market in 1997. Several years ago, production was organized in Russia. Today Deceuninck windows are worthy competition to such as Veka, Rehau, KBE

The first samples presented to the Russian buyer were Zendow, AD, Favorit, Bautec, Forward, which met all the requirements of their time and had quite affordable prices. However, time passed, demands grew, materials and technologies improved. From the mentioned list, only the last three models remain today (although Favorit and Bautec are also obsolete today). However, they were replaced by two models that were much better adapted to the harsh Russian climate: Favorit Space and the elite Eforte. The cost of brand products is from 4 to 15 thousand rubles.

Schuco Company

Not all consumers know which windows are best to install in their apartment. Some believe that the more expensive the product, the better quality it is, others are sure that the most important thing is the material, others think that the main thing is the level of sound insulation. In fact, high-quality PVC windows should have all these characteristics.

As for Schuco windows, even the very best cannot always compete with them in terms of quality. popular brands. The fact is that all production is concentrated in Germany. In this regard, the brand’s products are of the highest quality.

The company supplies three types of profiles to the Russian market: three- and five-chamber double-glazed windows. In addition, the company also produces seven-chamber models. All products in Russia are considered elite. The price varies from 6.8 to 18 thousand rubles.

Montblanc

Often people do not consider the products of domestic manufacturers when they think about which windows are best to install in their apartment. Photos in special publications most often advertise products of famous world brands. Nevertheless, we advise you to pay attention to the Russian company Montblanc.

Production is based on German equipment, but the factories are located in Russia - in Elektrostal and Khabarovsk. Their products have been on the market since 2001.

The company presents six modifications of profiles: two five-chamber and one six-chamber. These products are classified as economy class. Price - from 3.5 to 6.2 thousand rubles.

Windows WDS

When we decide which plastic windows are best installed in an apartment, the price factor is often decisive. It was thanks to him that the products of the famous WDS window profile very quickly gained good distribution in our market.

The company is betting on a buyer with an average level of income. WDS windows have two main characteristics - affordable price and good quality. The models are not distinguished by their exquisite shapes and varied color solutions, they do not have excess functionality. Traditional rectangular double-glazed windows are available as either fixed or opening, with medium and high insulation. Therefore, the prices are reasonable: an opening window costs from 4.5 thousand rubles, and a blind window costs from 2 thousand rubles.

Which company's plastic windows are better? Customer Reviews

We introduced you to the main manufacturers of these products, which today share the Russian market. However, we are sure that the information received does not yet allow you to decide which plastic windows are best to install in your apartment. That is why we want to turn to reviews from profile owners of various companies. This will allow you to make the final choice.

We could not find information about REHAU windows negative reviews. People assure that these products are really high quality, contractual deadlines are met, and the technical characteristics fully meet those declared by the manufacturer. There are some complaints about the high price, but, as you know, a quality item is never cheap.

Veka captivates its customers not only with excellent quality, but also with excellent organized work personnel - managers, measurers, installers.

Reviews about KBE windows are mixed. With not the most low prices Some buyers are happy with their purchase, but there are also many who complain that the windows are leaking and moldy. Therefore, people recommend purchasing “Standard” and “Etalon” windows, as well as choosing high-quality fittings.

With the products of Samara Window Constructions, problems may arise with contractual deadlines. Unfortunately, they are not always observed. There are also many complaints about the work of the installers.

SALAMANDER windows do not cause any complaints in terms of quality. However, many are not satisfied with the rather high price.

Deceuninck's designs, as it turns out, aren't that good. Many people complain about poor sound insulation and black spots appear on the profile. There were a lot of angry words addressed to the company management regarding poor quality installation.

But the majority of buyers are satisfied with Schuco windows. The products are high quality, and besides, there is such a service as five years of free service.

The same can be said about the products of the domestic company Montblanc. At an affordable price, the quality is excellent. Buyers also note the professionalism of the employees.

WDS windows fully meet the stated characteristics, and the price is reasonable. The only disappointing thing is the small selection of colors and shapes of the models.

When planning to replace the old frames in the house, many are faced with the question - which plastic windows are better? The quality of a metal-plastic profile depends on the manufacturer and the material he uses during production. But that's not all: the long service life of a plastic window depends on the right choice profile for specific conditions (climate, type of building), quality of assembly and installation. Unscrupulous sellers can profit from people who do not really understand the characteristics quality profile, trying to sell a product of average and poor quality at a higher price. To avoid this, we recommend that you read the recommendations for choosing a plastic window and the ratings of manufacturers based on reviews from consumers and experts.

Which profile for plastic windows is better?

To answer the question of which plastic windows are better, you need to consider the main characteristics of double-glazed windows. Based on the technical parameters of the profile, you can evaluate its quality at the time of purchase, so as not to make a mistake with your choice.

Material and profile uniformity

Plastic window designs made from a material that belongs to the group of thermoplastics - polyvinyl chloride. During production, stabilizers, modifiers, plasticizers, and pigments are added to powdered PVC. They make the window structure durable, resistant to ultraviolet radiation and other atmospheric influences. All additives in PVC are harmless and do not harm human health.

But you should not choose cheap profiles - usually low-quality plasticizers are added to them. Therefore, when purchasing a window system, it is important to pay attention to the presence of an unpleasant odor and too cheap a cost - in this case, there is a risk of purchasing a product with a questionable composition.

To give strength and rigidity to the structure, it is reinforced with metal from the inside. Externally, the buyer will not be able to distinguish a high-quality, reinforced structure from a non-reinforced one, so you can check the presence of metal inside it using a magnet.

The coating of a high-quality profile should be smooth and uniform. A grainy surface with streaks or a gradient is a sign of a fake.

Conclusion: A high-quality PVC profile is characterized by uniform coloring, a smooth surface, and does not have an unpleasant odor. Composition and environmental Safety window profile must be indicated in the manufacturer's certificate for the product.

Wall thickness

The thickness of the walls of the PVC profile determines how long the window will last and how it will retain its shape from loads during operation. In accordance with the thickness of the external and external walls, three groups of structures are distinguished:

The question may arise: which windows are best to install in an apartment from these three classes? Class A profile - best option. It is used for glazing of houses, apartments, and offices. You can check the wall thickness when purchasing at the seller’s office - he must provide cross-sectional samples of metal-plastic profiles.

Conclusion: choose a design with a wall thickness of at least 2.8 mm. In this case, you need to ensure that the thickness of the profile is uniform.

Number of air chambers

Air chambers are hollow spaces inside a window unit, which are formed by its partitions.

The more cameras, the better window retains heat, and the higher its soundproofing qualities. The minimum number of cameras is three.

For an apartment, 3- and 5-chamber structures are usually sufficient, and they are the most common.

Conclusion: for glazing an apartment in temperate climate A three-chamber system is sufficient. But for glazing a private house with increased energy saving requirements, it is better to choose 5 or 6-chamber PVC windows.

Number of double-glazed windows and their characteristics

One double-glazed window consists of several glasses connected to each other along the contour by a special frame and sealant. Between them are sealed air chambers, sometimes filled with another gas.

According to the number of double-glazed windows, window systems are 1, 2, 3 and 4 chamber:

1. Single-chamber double-glazed windows are the lightest. They consist of one air chamber and two glasses.
2. Double-glazed windows, as the name suggests, consist of 2 air chambers separated by three sheets of glass.
3. Three- and four-chamber double-glazed windows are heavy and transmit less light than single- and two-chamber ones. They are usually installed if you live in a harsh climate with cold winters.

Due to their light weight, single-chamber double-glazed windows are well suited for glazing panoramic windows on terraces, balconies, and loggias. But such glass is too “cold” for an apartment or house.

The quality of the glass also plays a role important role. There are windows with ordinary glass, but there are double-glazed windows with special features:

• Anti-vandal glass coating. It protects the surface from impacts and other mechanical influences, making the glass more durable.
• Tinting: protection from direct sunlight.
• Triplex lamination: when broken, glass does not shatter into sharp fragments.
• Energy saving glass. A special coating screens heat rays from the room back, reducing heat loss in the room.

Conclusion: double-glazed windows are most suitable for installation in residential buildings and apartments, having good thermal insulation properties. But for harsh climates, it is better to choose thicker double-glazed windows.

Profile width

The width of the profile depends on the number of cameras. The wider it is, the warmer the window will be, and the more stiffening ribs there will be inside the structure. The second factor indicates the strength of the PVC block, since small-chamber structures are easily deformed.

Manufacturers produce profiles with widths from 58 to 90 mm. Window systems with a width of 58-70 mm are considered the most common; they are suitable for providing normal warmth and silence in the house. A width of 58 mm is typical for single-chamber windows with double-glazed windows up to 32 mm thick.

The 70mm wide design will provide higher performance. Suitable for most regions of the country. This profile is used for double-glazed windows 40 mm wide with any type of glass.

Conclusion: If you live in a region with harsh winters, it is better to choose double-glazed windows with an installation width of 80 mm or more. They show the best heat saving qualities. For other regions, a width of 58-70 mm will be sufficient.

Which company is best to install plastic windows?

Having familiarized yourself with the main characteristics of plastic profiles, another question arises - which plastic windows are of the highest quality? When choosing a brand, i.e. a window block manufacturer, you can rely on reviews of other consumers, recommendations from friends or expert advice. The main leaders have long emerged on the world market, so the choice should not be particularly difficult.

REHAU windows

German brand, but window production in Russia began in 2002. The company provides each plant in Russia with its own quality certificate, so there will be no doubt about the level of the product produced. REHAU is a wide range and high quality:

• Window system BLITZ New: 3-chamber windows 60 mm deep. Energy-saving glass with two sealing contours.
• DELIGHT-Design: 5-chamber windows 70 mm wide. The height of the profile structure is reduced, which makes the window leaf wider. Because of this, the design allows more light into the room.
• GENEO: 6-chamber windows 86 mm deep with an additional (central) sealing contour. Provide maximum sound insulation.
• EURO-Design: 3-chamber systems 60 mm deep with two sealing circuits. A varied palette of shades, a choice of textures.
• BRILLANT-Design: window system with five air chambers and a depth of 70 mm. Profiles with a smooth, shiny surface. The profile shade can be selected according to the RAL scale.
• GENEO HST: lift and slide window system. Two options: standard and barrier-free.
• SIB-Design: 3-chamber system with thermoblock (5) chambers, depth - 70 mm. Thanks to the “thermoblock” insulating chamber, windows are often installed in regions with temperature differences of more than 60 C.
• INTELIO 80: system with 6 air chambers, 80 mm deep. In winter, a double-glazed window protects the room from heat loss, and in summer - from overheating from the sun's rays. The system is suitable for the production of panoramic windows.
• EURO-Design Slide: sliding system for balconies, loggias, terraces with two sealing contours.
• GRAZIO: 5-chamber system, 70 mm deep. Provide good sound insulation, burglary protection, air and water resistance. Profile with a smooth surface.
• INTELIO: 6-chamber system with energy-saving glass. The low porosity surface of windows is easy to maintain.

Veka windows

Veka is a German brand. A subsidiary production company of this manufacturer, VEKA Rus, is located in Russia. The products have been awarded the German quality mark, so they comply with all control standards. Veka profile catalog:

• Euroline: 3-chamber, width - 58 mm. Double- and single-chamber double-glazed windows. They produce double-glazed windows with triplex coating, which are noise-proof and energy-saving. The fittings are anti-burglary and child-resistant.
• Softline: multifunctional solar control glass unit.
• Artline: 6-chamber system, 82 mm wide. Suitable for making windows and balcony doors. Three sealing circuits. The window sash is hidden behind the frame.
• Softline 82: 6-7 chamber system with a width of 82 mm. Profile thickness 3 mm with reinforcement.
• Swingline: 70 mm wide 5-chamber system with seam seal.
• Proline: 4-chamber profile 70 mm deep.
• Sunline: sliding 3-chamber system 58 mm wide for glazing balconies and loggias with reinforcement.

KBE windows

The brand is from a German manufacturer, but in Russia the KBE profile can be sold by any manufacturer of plastic windows. The cost of KBE window systems is lower than that of the first two manufacturers. During production, Greenline technology is used, which eliminates the impurities of heavy metals in PVC. KBE systems are often installed during mass construction of capital facilities. KBE window systems are available in installation widths of 58 mm, 70 mm, 76 mm and 88 mm.

Among the product units are blocks with air chambers ranging from 3 to 7 pieces, which can withstand temperatures down to -60 C.

The design of the windows is characterized by figured sashes, lamination, and the presence of aluminum linings.

SALAMANDER windows

German manufacturer with a representative office in Russia and a manufacturing plant in the Republic of Belarus. Window systems are distinguished by their high price, but you can be sure that they meet European quality standards. SALAMANDER produces profiles with widths from 60 to 92 mm, 3, 4 and 5 chamber systems.

They are distinguished by their design: rounded doors, the presence of aluminum overlays, and more than 30 lamination decors. The blocks retain their color for a long time thanks to a special surface compaction technology.

Deceuninck windows

The Belgian brand Deceuninck is represented in Russia by only one manufacturing plant. Deceuninck products are ISO certified in Belgium and Germany. There are conflicting reviews about the window systems of this manufacturer, which cannot indicate dubious quality. One of the disadvantages of this brand is the high price of outdated modifications.

The product line is represented by highly effective window systems mounting widths 60, 71, 76 and 84 mm with a number of chambers from 3 to 6.

Rating of companies

The previously listed brands can be ranked by rating, which is based on the following parameters:

• the company's popularity among Russian consumers;

While the windows are carved wooden profile became the destiny and decoration of expensive houses, wide application Plastic windows were awarded for installation in the main “residential mass”. The advantages of this material, and, equally, of the design itself, many include obvious noise and heat insulation, good resistance to various climatic conditions and the accompanying durability. The main feature of plastic windows is that there is no need for maintenance when the seasons change, as opposed to the same wooden frames.

The plastic window industry (especially in last years) literally flooded the domestic Russian market with an abundance of profiles and an assortment of diverse models. This situation has created a precedent for the complexity of the choice, which affects not only inexperienced beginners, but also real experts in the field of producing products of this type. Having analyzed the current situation on the market, we have selected for you the 15 best manufacturers of plastic windows, the superiority of which has been repeatedly confirmed by prestigious awards and flattering user reviews. The following parameters were selected as criteria for selecting applicants for the rating:

• the company’s popularity among Russian consumers (mentioned on forums, thematic websites and conversations);
• expert reviews on production technologies and product quality;
• general parameters of reliability and operational durability of the assortment;
• price range of plastic window models (average price).

The most popular manufacturers of plastic windows

5 Trocal

The oldest manufacturer of plastic windows
Country: Germany
Rating (2018): 4.9

If you believe the sources, the activities of the Trocal company began back in 1954 - it was then that production lines (it is unknown on what scale) began to work towards the creation of the first PVC profiles. Honoring their traditions, the Germans to this day produce designs that are successfully used for installation in apartments and private houses.

The problems and main advantages of profiles from Trocal lie in the chosen path of uniqueness. The manufacturer relied on increasing the reliability of the design by increasing rigidity and resistance to various kinds deformations. If in the case of windows this approach was successful good results, then the reinforced profiles turned out to be too heavy for the doors. In matters of design, users were more than satisfied: absolutely the entire line of the company is not devoid of design sophistication, which, in general, is rare even for honored market leaders. In general, the level of the company is very high: it is good in both key characteristics products and in terms of cost. A clear contender for the highest position.

4 Salamander

Manufacturer of the highest quality windows
Country: Germany
Rating (2018): 4.9

One step away from the prestigious top three is another German brand, which produces, perhaps, the best window profiles in the whole world. Salamander's personal “curse” is status. Due to belonging to the truly premium strata of manufacturers, the cost of their products goes far beyond the scope of their competitors, which, of course, has a negative impact on attracting a mass client.

The second negative aspect is... clone companies. Huge prices set a precedent for copies of windows from a famous German company to be stamped in a makeshift way and “merge” into the market in pursuit of the same colossal numbers. The precedent is unpleasant and does not play into the hands of the brand at all. But, be that as it may, Salamander continues to follow the intended course and offers the segment more and more innovative developments.

3 Rehau

High-tech production. The most advanced brand
A country: Germany/Russia
Rating (2018): 4.9

The third is the permanent competitor of KBE and VEKA, which has won the hearts of consumers (and experts) with its constant search for the ideal profile formula. In the REHAU laboratories, prototypes are being developed and tested day after day, only a small part of which is honored to appear in the store catalogue.

The process of manufacturing plastic windows itself is also harsh. With true German pedantry and punctuality, each technological operation is accompanied by a process of strict control. Thanks to this approach, the Germans managed to significantly reduce the percentage of defects and reduce the costs of reprocessing unusable products. But, like all other companies, REHAU also had a drawback. Despite the fact that the overall number of consumers is large, some are put off by the company's pricing policy. Yes, they manage to reduce internal costs, but they are in no hurry to meet new customers halfway (in terms of the cost of finished products).

2 KBE

Focus on consumer needs. The most affordable prices
A country: Germany/Russia
Rating (2018): 4.9

The second contender for leadership is another representative of Germany in the production of PVC profiles, who has earned such high place completely customer-oriented. The company's assortment concentrates huge variety window profiles suitable for both the southern and northern regions of a large country, and their cost is a good example for competitors (and, at the same time, the company’s most important advantage, along with the highest quality). By the way, quality concerns not only profiles, but also all the accessories accompanying them.

The disadvantage of KBE is prosaic and requires some drawing of parallels. The fact is that German products (produced directly in Germany) are the standard. But windows produced in Russian factories have a flaw in the form of gradual yellowing of the plastic, which some users did not fail to point out.

Until relatively recently, a plastic window in a house was akin to “know-how” that came far from abroad. Today this thing has become so commonplace that it is already wooden frames They look like a rare curiosity, irrevocably giving way to “eternal” plastic. But what is better: a product of carpentry or conveyor technology? What are their advantages and disadvantages? We find out from the detailed comparison table:

1 VEKA

The best range of products in terms of price and quality
A country: Germany/Russia
Rating (2018): 5.0

A German brand that actively and successfully retains the largest segment of the domestic consumer audience for its products. The VEKA company entered the Russian market in 1999 and in such a short period of time managed to win a number of significant victories. The opened branch of VEKA Rus became the first in Russia to receive a certificate of compliance with European RAL quality standards - a mark that none of the company’s closest competitors has.

In addition, thanks to the full technical equipment of the production lines of the factories, the company abandoned the production of low-grade products, turning all attention to the production of class “A” profiles. This means that all models of window profiles (of which there are six in VEKA) have a high degree of protection from external environmental factors and are suitable for use in any climatic conditions.

The best manufacturers of middle and premium class plastic windows

10 Kaleva

The only Russian company full cycle work
Country Russia
Rating (2018): 4.5

Kaleva is a Russian company with a by no means Russian name, operating according to a full cycle scheme. This approach involves taking a product from its design to installation at the customer's request. A rare case, especially among domestic manufacturers. However, even in this field of activity, serious questions arose for the company.

Basically, the company is let down by dealer centers, of which there are at least eight dozen. According to customers, the organization of the installation process in some cities is extremely poor and requires subsequent dismantling and re-replacement. Despite all the quality of PVC profiles in such a situation, they will be haunted by inevitable loss operational properties. By the way, the head office does not bother, but delegates solving problems with dealers to the clients themselves. Not the most professional approach, but there is hope that further measures will be taken.

9 Deceuninck

One of the world leaders in the production of plastic windows
Country: Belgium/Russia
Rating (2018): 4.6

A Belgian concern whose world fame greatly outstrips its fame among Russian consumers. According to authoritative sources, The Deceuninck Group consistently ranks among the world's leading manufacturers of PVC windows.

What about Russian branch, then the most significant contribution to the common cause of the company was receiving a prestigious award for the creation of the “Favorite Space” profile system. Among the obvious advantages, we should highlight the fact that all window options have a certificate of compliance with international standards. But this plus had a negative impact on the price level, “thanks to” which a relatively small audience resorts to installing Deceuninck windows. If we talk about cheap models, they are frankly worse than similar products from opponents, both in terms of quality and overall appearance. Thus, a world-famous company can be content with only getting into the TOP 15 best, and not a hint of leadership.

8 Krauss

The best range of lightweight profiles
Country Russia
Rating (2018): 4.6

Since the company’s production lines are located in Krasnodar, Krauss plastic windows, quite logically, are designed only for warm climates. That is, the “one-sided” specialization of products instantly cut off the entire Siberian region (and others like it) from the consumer part.

However, you should not blame the company for the chosen path, since PVC quality-the windows are at the proper level. The variety of profiles leaves much to be desired, but the available assortment shows itself exclusively on the good side. There is only one nuance that is alarming, which, even with proper installation, nullifies all the pleasant impressions of the product. The fact is that according to the enterprise standard, some series of windows are equipped thin layer seals (less than three millimeters). This causes drafts and dust accumulation (according to users), which is “treated” by installing other rubber bands.

7 Panorama

The company from St. Petersburg is not very popular, although it has existed on the domestic market for more than 20 years. It would seem that there are not many prerequisites for this. According to consumers, the company’s PVC profiles are different good quality and, in general, they deserve to be, if not in the TOP-3, then certainly in the top five. They have an optimal balance of rigidity, provide good insulation (especially the five- and six-chamber Enwin Waiz 70 and Deceuninck Favorit Space profiles), and also have a pleasant appearance. In addition, the cost of all models (at least standard ones) is within the market average.

The reason for Panorama's low popularity is its approach to customer service. As experts note, the company’s service is not distinguished by efficiency and intrusiveness... to such an extent that information about all the options has to be pulled out, as they say, “by thread.”

6 WDS (Window Door Systems)

Best performance ability
Country Ukraine
Rating (2018): 4.7

The young Ukrainian company, which began its activities in 2006, has shown a very serious attitude towards “capturing” a decent segment of the market. The work of WDS is based on the principle of “production for our own” - it was under this motto that the first years of the company’s activity were spent. Due to the fact that when developing the profiles, all aspects of the climate of Ukraine, Belarus and Russia were taken into account, the windows received an simply insane level of “survivability” even under poor operating conditions.

From the point of view of assortment, WDS is also doing well. Today the company has six lines, each of which has a unique design and simplicity. The company's disadvantage is its limited trading network: the company’s activities in Russia do not extend beyond the regions adjacent to Moscow (Lipetsk, Bryansk, Oryol, etc.). This fact largely determines such a low place in the final ranking, but just appearing in it can already be considered a good result.

5 JUICE

The best material base
Country Russia
Rating (2018): 4.7

“Samara Window Constructions” owes its origins largely to the German concern Profine, under which it has been working since 1999. The paradox of the company is that, without having any production base, COK “lives” on the developments of the above-mentioned concern, namely the KBE brand. It would seem that drawing such a parallel with a world-famous company should have led to a massive increase in demand for the product...

...but this, unfortunately, did not happen. With an excellent level of reliability and durability, plastic Window panels turned out to be endowed with one very insidious flaw, which appeared only after several years of successful use. After a certain time, the plastic begins to turn yellow intensely, which indicates a possible violation technological process produced at a Russian plant.

4 LG Chem

The best eastern supplier of plastic windows
Country: South Korea
Rating (2018): 4.7

The only representative of the eastern trend in the production of plastic windows, relying on the distribution of goods in the eastern part of Russia. Needless to say: due to the close location, the main consumers of PVC profiles are residents Far East(and only a small part of the windows reaches the rest of the large state). This fact largely predetermined the fact that the main characteristics of the product have not yet received more in-depth analysis and study.

Based on user reviews, we can conclude that LG Chem windows (in all their variety) have good insulating characteristics and are made from glossy plastic High Quality. True, the latter often acts as the initiator of problems - if the gloss is damaged, it is not so easy to restore its former appearance. As for the price, it is low in comparison with competitors and, in general, looks good against the backdrop of high quality.

3 Plafen

One of the best manufacturers premium windows
Country: Austria/Russia
Rating (2018): 4.8

Extra-level PVC profiles, the installation of which will satisfy even the most picky buyer. The Plafen assortment includes five model series, designated by the letters S, T, E, L, C. The main feature is the stylized profiles of different types of wood, which gives a more expensive look and is suitable for any interior. According to the company's official website, the minimum service life of a window is more than 60 years without any serious breakdowns or flaws. In general, the comments of the owners fully confirm such a serious statement from the manufacturers: when good installation There are no drafts or freezing observed.

Of course, it was not without its drawbacks. High-quality windows simply could not help but acquire a hefty price tag, which only a small part of consumers could afford. And the company itself positions itself as reliable supplier windows for business, which also scares off ordinary potential buyers.

2 Proplex

Good quality at a low price
Country: Austria/Russia
Rating (2018): 4.8

One of the few brands of Austrian/Russian origin, characterized by affordable prices and full adaptation to the climatic conditions of the country. The Proplex asset includes the excellent quality of PVC, which is not prone to yellowing and has high level strength. This fact is often sufficient for consumers - people are happy to purchase windows for installation in both private homes and apartments. The only problem is that the brand’s assortment contains models whose appearance smacks of hackneyedness and obsolescence. These cost much less than new developments, but show no less convincing results in all operational parameters.

The second problem of Proplex (much more global) is related to the scale of the network - the lack of a certificate of compliance with international standards greatly prevents the company from expanding beyond the Russian market.

1 Montblanc

Optimal balance of performance characteristics
Country Russia
Rating (2018): 4.9

Montblanc is a subsidiary of the STL-Extrusion concern, which has grown significantly over more than ten years of work on the market. Its main asset was the development of an extensive network of dealers, thanks to which the brand acquired a solid customer base. Not the same as German brands, but still quite decent.

From the point of view of advantages/disadvantages, the company has a strikingly one-sided positive balance sheet - the only liability that can be written down is the lack of an ISO certificate of conformity at factories located in Russia. Otherwise, there is a complete idyll: both in terms of the quality of the windows, and in terms of fittings (provided by partner factories), and in terms of durability. Montblanc's range (currently) includes seven types of profiles, each of which has a unique set of chambers and widths for different climatic conditions. Good and inexpensive option for glazing of houses and apartments.

How to choose the best plastic windows?

The main obstacle to choosing the right plastic window for your home or apartment is the fact that there are so many different profiles available. But the difficulties of buyers are connected not only with them - any window has many nuances that can dramatically affect performance characteristics. Therefore, in the selection process, “MarkaQuality” recommends paying attention to the following aspects:

Profile type. According to known standards, window profiles are divided into three groups: blind, turning and tilt-and-turn. The former will be suitable for installation in large areas that do not require ventilation. The remaining options, on the contrary, are best purchased for small, ventilated rooms.

Number of cameras. Here you should be guided the following principle: the more cameras a window has, the warmer the room will be. Choose the number of double-glazed windows according to the climatic conditions: from three for severe winters, and less if you live in warm areas of the country.

Glass. Recently, manufacturers have moved away from using ordinary glass, replacing it with low-emissivity samples enriched with silver atoms (even safer, even newer). This is very easy to check: a lit match in the case of “emissive” glass will produce not a red, but a violet glow.

Accessories. An element on which we recommend not to skimp. Whatever the frame (aka profile), the main consumables of plastic windows are the fittings (handles, locks and combined awnings).

Manufacturer. Advice, last in order, but most important in terms of significance. Pre-selecting a manufacturer will give you the opportunity to look at something in the range, as well as find out the approximate cost of the order. We strongly recommend that you take a closer look at the TOP 15 nominees.

Plastic windows are the most popular choice. They are durable, insulate noise well, are easy to care for, and their thermal insulation properties are especially important in continental climates, with hot summers and harsh winters.

Which plastic windows are best to choose for an apartment? This question will help answer rating of plastic windows by quality, compiled in 2018 based on user reviews from the Irecommend and Otzovik websites.

Also, when compiling the window hit parade, such criteria as the durability of the company, the popularity of its products, quality of service and, of course, price were taken into account.

The cost of a double-leaf window is from 7,500 rubles.

Opens the rating of the best plastic windows “Panorama” - one of the oldest manufacturers of plastic windows on the Russian market, staying afloat for more than 20 years. Over the years, the St. Petersburg company has glazed more than one and a half million square meters. So far, the only thing that upsets users is that the company’s service is so unobtrusive that it is difficult to obtain information about possible options.

Cost - from 14,000 rubles.

SOK, or Samara Window Constructions, was founded in 1999. Your own production the company does not have, and the profiles are manufactured under the patronage of the German concern Profine. In the ranking of the quality of profiles for plastic windows manufactured Profine KBE profile is considered one of the best, they have received many rave reviews for their durability and strength. Cons: the windows may turn yellow, possibly due to a violation of technology at the Russian manufacturing plant.