DIY tire products for the garden. What can be made from old tires

Used car tires do not need to be thrown away. After using them for their intended purpose, you can use the tires to decorate the yard or garden plot. More interesting ideas you can see it in others, but why not try to do the same near your home? After all, the process of making many crafts is very simple.
Giraffe
For this interesting figure, you need to dig one large tire into the ground, up to the middle of the circle. Secure a tall round log in front with self-tapping screws. You need to attach a muzzle to it - a small frame of a tree. Eyes and ears can be cut out from a plastic bottle or a piece of linoleum. All that remains is to paint everything yellow and make brown spots.

Zebra
This figure is made in exactly the same way as the giraffe, only the paint is needed white and black.

You can decorate your summer cottage or just a courtyard near your house with ordinary old wheels, and many craftsmen make real masterpieces with their own hands! Indeed, in our country the recycling of used tires is not highest level, and we can see a lot of tires thrown right onto the street. But you can combine business with pleasure and create crafts - decorations for summer cottage, garden, vegetable garden with your own hands. Let's look at a selection of photos of crafts made from tires:

We use tires in the garden

With the help of paint and imagination, you can create your own real work of art. There can be a lot of options for making flower girls; we will look at the master classes themselves in the following articles, but now let's look at the southern exotic - the palm tree:

DIY tire tree tree

Crafts on the theme of southern holidays are very popular with us; we have already published an article that described its production in detail. In addition to exotic plants, you can also create African predators:

Tire crocodiles

Decorate your garden with tire crocodiles

Such animals can not only inspire admiration, but also scare away unwanted guests... They are really made very beautifully and believably.

Elephant from old tire and cameras in the garden

A colorful blue elephant, all from the same southern African countries, will look very good on the playground. Here are a couple more examples of these wonderful inhabitants of Africa:

By painting a tire correctly, you can create your own zoo from a wide variety of animals from all over the world. And all you need is desire, a few tires and a little imagination. Here at someone’s house a tire was turned into snails and a black and white zebra:

Snails and Zebra: crafts from tires for the garden

You can come up with fancy birds to decorate your garden; for example, a parrot can be a good home for flowers:

Parrot and swans: homemade products from an old tire

For bird lovers, you can make these fun crafts:

Birds - crafts made from tires for the country garden

The pet birds turned out very wonderful, they don’t even look so impressive!

Turtles from a tire

“Auto” turtle from a used car tire

Car tire turtles

How about a cup good tea?? You can also make a “tea set” to decorate a flower garden; such a cup will be difficult to pick up, but it looks great!

Tire crafts for the patio

For a complete tea set to go with these cups, you need good garden furniture, here are just the right tire samples:

Old tire as furniture

The furniture turned out to be truly original, although it cannot support the weight of a person on its own, so the frame must be made of a metal structure.

Playground decorations using a tire

Fairy-tale animals can decorate both your playground and the area near your home. Few people will be able to pass them without smiling, and children will be most interested in such figures.

Funny horses

Horses made from car tires

These garden helpers will help you transport something, or simply transport a tire or flower garden with your carts.

Garden Crafts

basket - flower garden for the garden

Well, at the end of our photo selection, let’s watch a video in which I also use tires for needlework and which will be a good addition:

DIY tire crafts

That's all, we hope you liked the photo selection of crafts made from tires and tires with your own hands, see you on our pages!

Content

Modern applied art has no boundaries, so any available material is suitable for its implementation. So, to arrange a summer cottage, the garden area of ​​a house or a playground, they create decorative items from tires. Easy to make from rubber original flower beds, flowerpots, pieces of furniture and figurines in the form of animals.

How to make crafts from wheel tires with your own hands

In the hands of a creative person, a car tire can find a second life as a landscape decoration. To create crafts from tires, you only need to have imagination, a desire to create, and tools: a sharp knife, household gloves, paint and chalk for marking contours. Before the beginning creative process It is advisable to make a sketch of the future object on a piece of paper, and then mark the contours on the tire. The manufacturing process does not take much time, the instructions are simple, and the result is a masterpiece.

Car tires are ideal for spaces under open air because it can easily withstand any weather conditions. Charming crafts can decorate your dacha or playground for several years in a row. However, the rubber gets too hot in the sun. This fact should be taken into account when creating furniture on which you plan to relax in summer time of the year. Crafts made from old tires require virtually no maintenance - they only need to be washed occasionally with soapy water.

Interesting DIY crafts made from tires for the garden

Modern summer residents strive to show creativity not only in the garden, but also when designing their backyard and garden. They make their site more well-groomed, beautiful and original. Crafts from car tires can be not only decorative, but also become practical and useful thing for the household. A car tire is a practical material at hand, from which it is easy to make an original thing even for a person who has never encountered manual work before.

Rubber tires are used to create adorable animal figures. By taking one or a pair of tires, making slits in the right places and where necessary, bending them, you can get a bear, frog, giraffe, caterpillar, crocodile, donkey, dog, elephant or turtle. If you wish, you can create a cartoon character in the form of a minion, Luntik, matryoshka, car or Fixies. Additional details crafts are made from plywood. At the end of the creative process, crafts made from tires are painted in bright colors and placed in the yard for everyone to enjoy.

If you don't know what you can do from old tires, then start with a flower bed. Fences for flowers made from tires are the most in a simple way decorate the garden. If you show a little imagination by cutting and turning out the rubber, you can create original flowerpots or flowerpots into which soil is poured and plants are planted. Summer residents often use tires as a compost pit, placing one tire on top of another. Attractive swings, sandboxes, steps, fences, chairs - machine tires that have been given a second life are suitable for these products.

Tire chair

Tires can be adapted to interesting furniture, which will definitely come in handy at the dacha and will become an attractive novelty for all guests. It will not just be a rubber structure, but a comfortable recreational item for a terrace, veranda or open space. To create a chair from tires you should take:

• old car tires – 2 pcs.;
• flexible plywood - board measuring 100x90 cm;
• foam rubber - a couple of pieces: thick and thin;
• felt;
• tools: screwdriver, self-tapping screws and furniture stapler.

If you have all the necessary components at hand, then it’s time to start making garden furniture:

1. One car tire is placed on top of another, they are fixed together with self-tapping screws.
2. A piece of felt of appropriate size is attached to the bottom of the potential product, that is, to the bottom tire, using a stapler. Thanks to this element, the chair can be easily moved on the floor covering.
3. The plywood that will serve as the back is bent and secured to the tires using a self-tapping screw.
4. After this, you need to cut out circles from foam rubber. We make one from thick material outer diameter tires, and a couple of others - from thin. A large circle is thrust into inner part tires, which are located on top. Thin circles are placed on top of the tire to provide comfort to the product. The parts are fixed with a stapler.
5. The back is being processed. Thin foam rubber is placed over the plywood.
6. The final touch is a cover made of quilted material.

DIY tire ottoman

What can be made from old tires? An exclusive solution There will be an ottoman for the cottage and home. It can be done in a simple way, but for this you should take:

• car tire;
• strong thread in the form of twine or hemp rope;
• a piece of plywood, enough for a couple of laps;
• tools in the form of screws and a glue gun;
• coating varnish.

A tire ottoman will be interesting design solution for arrangement modern interior, because a piece of furniture is not only beautiful, but also comfortable. The manufacturing process is as follows:

1. Circles of plywood are placed on the bottom and on top part tires, secured with self-tapping screws.
2. We begin to decorate the upper part of the ottoman, which will consist of twine. Thanks to glue gun fix the rope or cable to the plywood turn by turn according to the snail principle, starting from the center. This is done until the tire is completely closed.
3. Upon completion of the creative process, the twine is coated with varnish, which will protect the product from negative impact environmental factors such as moisture.

Tire swans for the garden

Animals, birds and aquatic life made from car tires look amazing. Thus, swans made from used tires are a chic work of art. To make them you should take:

• old tire;
• white chalk;
• paint (preferably water-based);
• jigsaw, drill, screws;
• plate.

The process of making crafts is not the most difficult, but it requires consistency and care during work:

1. Make a sketch on the prepared tire, drawing the swan's head in the form of a 9X2 cm rectangle, starting from the beak. Then they draw a neck on the tire, which extends from the head and occupies more than half the circumference of the tire. Straight lines are drawn carefully so as not to fall into the cut. The tail line will be in the beak area and will take approximately twenty centimeters.
2. They begin to cut out the swan, which is done with a drill and then with a jigsaw.
3. The tire is turned inside out, giving the silhouette of a swan. The widest part will be the support, which is turned inside.
4. The head and neck will not be supported without a solid support, so a plate should be attached to this area.
5. When the product is ready, it's time to start painting.

Decorative crafts made from wheels for the playground

What can you make from old tires on the playground? There are a lot of ideas that transform a used item into beautiful products for decorating the yard area. You can use old tires to decorate a playground, turning it into a fairy-tale town where kids will always have fun and interesting time to spend their leisure time. Winged swings, mini-sandboxes, animals, and cartoon characters made from tires will be a colorful addition to the recreation area for girls and boys.

Tire sandbox

Playing in the sand is a favorite activity for children on the playground. However, not every yard can boast of an interesting sandbox. A convenient and beautiful container for sand can be made from a KAMAZ tire. To do this, you need to fix the rubber on the selected area, carefully paint it and fill it with sand. The process of making a sandbox can be done together with your child; believe me, the child will be very interested in painting the future sandbox in different colors.

Children's swing made from tires

From an old car tire you can make not only a beautiful sculpture, but also a children's attraction. So, a swing made from a car tire will allow your child to have fun at the dacha. It is worth noting that they are less traumatic than wooden and metal models. There are many options for tire swings, but you should start with simple ones. First thing:

• prepare an old machine tire;
• take a sharp knife;
• find a rope or chain;
• then find a strong branch on the tree that will serve as a support.

Step by step device process homemade swing there is nothing complicated about it. Initially, you should make a strong loop at one end of the rope, which you throw over the selected branch. Pass the other end of the rope through the wheel and into the loop. Hang the swing vertically, perpendicular to the ground at a level of ninety centimeters. The product is designed not only for children, but also for adults of moderate weight.

Sun made from tires and bottles

A sun made from bottles will decorate any playground or garden. To make such a homemade product, you will need a machine tire, a piece of plywood, self-tapping screws and half-liter plastic bottles that will serve as rays. To create a solid structure, it is necessary to nail plywood onto the tire, outside screw the bottles around the circumference, go over it with yellow paint a couple of times, and paint the face of the sun on the plywood.

Video: what can be made from tires

Crafts made from car tires are an affordable and beautiful decoration which you can do yourself. IN in capable hands Craftsmen transform unused car wheels into charming sculptures. Watch the video for step-by-step instructions and understand what can be made from tires. If you have a few unusable tires lying around in your garage, don't miss the opportunity to give them a second life by creating a few pieces.

Do you have a garden or vegetable garden and old unnecessary tires? Then you simply must make a cute craft. It will become the pride of your site if you do everything diligently and carefully. This does not require any special financial expenses, but the time needed is from a couple of hours to a couple of days.

Complex tire products

Now let's move on to considering more labor-intensive options for crafts made from tires. In fact, they are only slightly more complex than the previous ones. You will see this for yourself when you take a look at the master classes.

Making a swan

Manufacturing involves cutting, so it is better to take very worn rubber with a longitudinal pattern. The first stage of work is marking. Draw a swan's neck on the tire as shown in the photo. It should take up approximately half the length of the tire. Next, draw the outlines of the head (length about 10 cm) and beak (slightly shorter). The tail will begin where the beak originates, and therefore will have a forked end. Make it the same width as the neck, and let the length be about 30 cm.

Now it's time to move on to cutting. Depending on the condition and thickness of the rubber, perform the work using a shoe knife, grinder or jigsaw. It is better to cut on both sides of the tire in parallel. Having finished cutting, we begin to turn the workpiece inside out.

The next stage is strengthening the neck and tail. To do this, make two holes along these parts every 15 cm. You will thread metal staples into them that will hold the rigid rod. After this, the neck and tail need to be given a beautiful bend.

The final stage is painting. You can make yourself either a white or a black swan. Let the beak be red. That's all.

Glamorous flowerpot

Previously, we looked at simple flowerpots made from tires for the garden plot. Now turn your attention to a more complex and attractive option. Draw a gigzag line on the tire and cut along it. When finished, turn the tire inside out. The cut piece usually serves as a stand. Now take some paint outdoor works any color and decorate your flowerpot to completion.

quiet lake

It's always nice to make something beautiful and useful out of a junk item. A good example such creativity - beautiful flower beds from tires. They are not difficult to build, but their benefits are enormous. But the imagination of dacha masters is not limited to this. From old wheels, which often just lie on the road and pollute environment, they make street furniture, sculptures for the garden, and even build small children's towns.

Such a simple and unsightly material at first glance, like old car tires, in fact, seems to be specially created so that every summer resident can feel like a real artist and decorate his plot with real designer flower beds and original author’s sculptures. Without exaggeration, you can cut anything out of tires. Such crafts are on par with those made from plastic bottles all year round will delight the eyes of the owners and guests of the dacha, and most importantly, will not require special financial investments.

It’s also nice that the benefit of the idea of ​​making crafts with your own hands from tires is twofold: on the one hand, we recycle a wheel that polluted the environment, and on the other, we get an original garden decoration or flower bed.

Crafts made from used rubber tires amaze with their variety and the richness of the imagination of their authors. Here are the most common ones:

A small flower bed. The easiest way to make flower beds from tires is to leave the tire as is, just decorate it brightly and fill it with soil. Nothing complicated. Even a weak woman or child can cope with this, and such a flower garden will look wonderful.

Flower beds made from old tires in the form various items. Make them more difficult. The tire is cut into two unequal parts and the larger one is turned inside out. It is worth noting that the edges of tires can be made various shapes, it's all just a matter of imagination and sleight of hand. Using this technique, flower beds are made in the form of a mug, flower, or vase. A huge rubber cup made from tires looks very funny. And some craftsmen thus build an entire tea set on their site.

Flower beds and sculptures in the form of animals and fairy-tale heroes. A funny frog made of tires, a kind gnome, a mysterious unicorn, beautiful swans, a three-headed dragon, a turtle, a luxurious carriage, a huge telephone - it’s easier to list what they don’t do from this available material. The only condition is to think through the composition from the very beginning, so that there are no unpleasant surprises later.

Multi-tiered flower beds made from several tires. The simplest one to make is a three-tier one, but the number of parts can be greater. Several tires of the same or different sizes, placed on top of each other or in checkerboard pattern. A tire well looks impressive, stylized to look like a real one and equipped with all its inherent attributes: a chain, a shaft with a visor, a bucket. This flower bed can also be used as a vertical bed for growing berries and vegetables.

A strawberry bed made from tires will take up minimal space and give a rich harvest. It is also perfect for growing seedlings, herbs, and peppers. From such a flower bed you can make a fence for a raspberry or currant bush, or make several of them and use them to delimit the garden into cultural zones. It is also worth mentioning that a well made from tires is often made not only decorative, but is used to disguise a drainage pit or septic tank.

Experienced craftsmen and craftswomen know many secrets that help them create garden sculptures and flower beds made from tires with your own hands. They understand better than anyone how to make unique and inimitable handicrafts from old, useless trash. Here are just a few of these secrets:

• Imported tires are best suited for the job, as the rubber on them is softer and easy to cut. But in their absence, domestic products will do. In principle, they are quite easy to process and allow you to make crafts from them different shapes.
• Tires intended for use in conditions winter roads, more pliable, easier to cut and easier to process than those used in summer.
• The longer the tire has been used and the more it is worn, the thinner, softer it is and the easier it will be to work with: cutting and turning.
• Before you start creating a craft, the material needs to be prepared: thoroughly cleaned of dirt, and degreased before painting.
• For cutting car tires use a sharp knife with a thin spine. You can check how well it is sharpened by running the blade along a notebook sheet, holding it suspended. If the knife does not cut or tears the paper, it is not sharp enough.
• Cutting a car tire for garden crafts It’s more convenient if you periodically lubricate the knife with machine oil. This will make it easier to fit into the rubber. Used oil will also work.
• When you need to cut out some shaped elements, markings are applied to the tire. It will help you achieve a more accurate and accurate result. It is most convenient to apply it with ordinary white chalk, or, in extreme cases, with a marker.
• The durability of the craft depends on what paint you use to paint the rubber. Suitable for old wheel tires: car paints, as well as any paints for street work.
• Before painting the tire, it is recommended to prime its surface. A primer with the addition of a small amount of PVA will increase the strength of the coating and reduce paint consumption.
• Paints in aerosol cans speed up the painting process to 20-30 minutes, and the painted layer itself is made more uniform.
• Decorative finishing can be made from scrap materials. For example, cover the surface with pebbles, bottle shards, or lay out pictures from colored plastic bottle caps.

It is better to paint a flower bed from a tire not only from the outside, but also from inside. This way they will look more aesthetically pleasing, and the black rubber will not be visible from the inside.

Of course, every master has his own secrets, and it is impossible to list them all. And when you take up this fascinating business - tire sculpture, you will certainly have them too.

Several master classes on making crafts from old tires

As mentioned above, crafts made from tires are varied. Their appearance and purpose are limited only by the imagination of the master. We invite you to familiarize yourself with the basic models. After reading them, you will learn how to make a flower bed from tires with your own hands and you will be able to create original, unique and useful garden accessories yourself.

A simple flower bed in the shape of a flower

A small flower bed made like a daisy from one tire is the simplest basic model. You can make several such flower beds, arrange them sparingly and decorate the approach to the house. Sometimes they are placed on asphalt or tiled areas.

We will need:

1. One old tire.
2. Sharp knife.
3. Marker or chalk.

Mark the cut location with a marker. We will cut the tire along them, from thickening to thickening.

Before cutting tires, make sure that they do not have metal cords that could damage the knife. They are usually inserted into truck tires.

We cut the tire along the entire circumference with even zigzag petals of any shape of your choice (triangular, oval, semicircular).

We turn the tire over and work with its reverse side. Moving the knife along the thickening, we cut out a circle from the back of the tire.

Then, along the entire circumference inside the tire, approximately every 20-25 cm, we make transverse cuts from the cut edge to the bend (end of the tread).

After this, the tire needs to be turned out. The flowerbed is ready. All that remains is to paint it, giving it a more attractive look, fill it with soil and plant plants.

For greater clarity, watch the following video:

Garden flowerpot from an old wheel

You can make a beautiful garden vase from an old wheel in a short time.
Such flowerpots look better in pairs in front of the house, on opposite sides of the door or porch. Let's look at a step-by-step master class on how to make them.

We will need:

1. Tire with disk.
2. Sharp knife.
3. Chalk or marker.

Using chalk or a marker, mark a zigzag line along the entire frontal circumference of the tire, along which we will begin cutting. Thanks to it, the flowerpot will look like a large flower with many petals.

Cut the tire along the marked line with a sharp knife. To facilitate the process, the knife is periodically dipped in machine oil (used oil will also work).

After the wheel is cut, we check whether there are any uncut sections left and proceed to turning it out. It is better to do this together with an assistant, slowly, in parts.

After we managed to turn out the tire for the future flower bed, it turned out that there was a tube in the wheel. It needs to be cut out and thrown away.

The flowerpot is ready. Its bowl was made from the main part of the wheel. There is no need to remove the disk from the tire. It serves as a raised platform and stand for the vase, and the remains of the tire at its base provide additional support.

All we have to do is clean, degrease and decide how to beautifully paint our new garden vase. When you pour the earth into the bowl, do not forget to put a gasket on its bottom so that the earth does not spill out and make several holes in it to drain the water.

Video instructions for making a flowerpot:

Swan from an old tire

The most popular garden sculptures made from tires are swans. They are usually placed near artificial pond, which gives the site a stunning look. You can plant grass in the bird itself, then it will seem that it is peeking out from behind the vegetation. Detailed information will help you make it step-by-step instruction with photo.

We will need:

1. Sharp knife.
2. An electric drill for making holes for a knife to fit into the rubber.
3. Sander or file.
4. Jigsaw.
5. Chalk or marker (preferably a marker).
6. Wire 5-6 mm in diameter (rigid, to give the shape of a “swan” neck).
7. Plastic clamps (to shape the head).
8. Roulette.
9. Gloves.

According to the diagram, we mark the contours of the future swan on the surface of the tire using the following video, in which the author uses dimensions in inches, calling them inch in the international measurement system. Inch (1 inch) = 2.54 cm.

How beautiful and neat our sculpture will turn out depends on the accuracy of the markings.

Let's start cutting. At the initial section, we drill 3-4 holes at a distance of 3-5 cm with a drill and cut the tire between them with a knife. We insert a jigsaw into the resulting cut and begin to cut out the swan.

After all the contours are cut out, turn the tire inside out. We try to do this carefully, since careless movements in the thinnest places can tear it.

To make the bird’s figure look more neat, we smooth all the cuts along the contour with a sander.

To shape the swan's neck, we insert a wire into it. To do this, drill holes in the center of the neck and to the end of the body every 20 cm. We apply the wire and secure it in the holes with soft staples.

Forming the head. We make longitudinal cuts and holes, as shown in the photo, and using the same wire or plastic clamps we give the swan’s head the shape.

Our tire swan is ready. All that remains is to paint it and make a stand.

The swan can be painted in White color or not paint at all, leaving it black. We make the beak red. Swans look very beautiful in a pair: black and white.

Without a stand, soft rubber swans will not stand. You can simply take any tire and paint it, for example, blue. Thus, it will symbolize the pond. Or you can take the time to make it curly.

We make the figured stand in the same way. We mark the outline on the tire along which we will cut, cut the tire along it, turn it inside out and paint it.

Using a similar technique, you can make any shapes from tires: animals, birds, fairy-tale creatures.

But, if you don’t want to bother with complex markings and cutting, you can do it simpler. For example, assemble a cute frog from whole tires.

Making a frog from tires is very simple. The body and head are assembled from one or several larger tires, eyes are assembled from small wheels, for example from a baby stroller, and paws are assembled from rubber scraps.

Flowerbed chamomile

It’s hard to come up with a decoration that’s easier to make than this flowerbed. Despite the fact that it requires several car tires, it can be assembled in literally 15-20 minutes, it looks nice, neat and will never be out of place.

We will need:

1. Three old tires of the same size.
2. A sharp knife or grinder.

We cut all the tires in half, having previously marked the cut locations. Before cutting, find out if there are metal cords in the rubber. A knife won’t take them, so use a grinder.

To give the future flower bed an aesthetic appearance, you can paint the tires. It is better to do this in advance, immediately after cutting.