How to make a corner shelf with your own hands. Do-it-yourself shelves on the wall: making a shelf on the wall with step-by-step instructions

Photo
Corner shelves save space, so this design solution is a godsend for small areas. You can make such a piece of furniture yourself, because this does not require special knowledge, expensive equipment And large quantity time.

Drawing of a corner shelf.

Selecting material and tools for the shelf

Corner shelf with your own hands can be made from various materials. Consumers very often choose chipboard, MDF or plywood. Another option could be window sill profiles, as well as glass.

The choice of tools depends on the material from which you need to create a shelf with your own hands.

So, for wooden models it is worth having:

• electric jigsaw;
• hacksaw;
• saw with fine teeth;
• drill;
• glue;
• a rack for creating compasses and compasses with a large radius;
• wooden slats for the basis of the structure.

Wooden corner wall shelf diagram.

If the corner shelf will be made from a window sill profile, then it is worth purchasing the following tools:

• drill;
• hacksaw;
• level;
• self-tapping screws;
• rail to enhance edge rigidity;
• glue "Moment";
• cable channels.

The fewest tools required when you need to make a corner glass shelf:

• set of holders for glass shelves(there are already screws and dowels here);
• level;
• drill.

When all the materials and tools to complete the work have been collected, you can begin creating the shelves.

How to make a corner shelf?

Creating a shelf and installing it is a fairly quick process. Therefore, in a few hours (or less) you can easily transform a room, which cannot be compared with the time required when it comes to creating a closet. You can make shelves correctly using step-by-step instructions.

Glass shelf

Scheme of a corner glass shelf.

To make such a shelf, you need to follow these steps:

1. A shelf template is created from cardboard.
2. Glass cutting and processing can be done both at home and in a special workshop. But it is the professionals who will do all the work high level, and the consumer will have the opportunity to choose the most suitable material.
3. Holders are purchased.
4. Next, you need to put the shelf on one of the holders, attach it to the wall and use a pencil to outline upper limit its fastenings.
5. The first holder is attached using the screws and dowels included in the kit.
6. The glass is inserted into the first holder, secured and put on the second. Using a level you need to level the shelf. Mark the drilling locations with a pencil.
7. The second holder is being attached.

This is a simple way to make glass shelves at home.

Shelf made of window sill profile

The shelf can be given any shape, but you should always remember right angle base that will be attached to the wall.

Corner shelf made of window sill profile.

To build a shelf, follow the instructions:

1. The material is marked.
2. Use a hacksaw to cut out the shelf.
3. Next, using a special strip, which matches the profile in thickness and length, the frame is strengthened. To do this, you need to place this material on Moment glue and secure it to the edge of the profile.
4. Holes are drilled in the already glued strip.
5. Self-tapping screws are driven into the wall under the holes already drilled in the shelf. A level is used during operation.
6. The open ends of the structure are hidden behind cable channels selected in thickness. They are placed on glue.
7. The shelf is fixed with self-tapping screws.

You can change the color of this design using various adhesive films selected for the interior.

Thus, an ordinary profile can easily turn into marble.

Shelf made of chipboard (plywood, MDF)

Attaching such shelves is done in several ways. The first is to attach it to the longitudinal rail-base, the second is to fix it in the grooves of the transverse base.

Scheme for making a chipboard shelf.

The first method is good because there is no need to drill either the tiles or the walls:

1. A shelf is cut out of chipboard. To do this, use a compass to draw a circle, divide it into 4 parts and cut each one with a jigsaw or hacksaw.
2. The location of the shelves and the size of the required groove are marked on the base rail. The blanks are applied to the rail, and their width is fixed.
3. Using a fine-toothed saw, cuts are made to the depth of the middle of the slats, and using a knife, the unnecessary element is removed.
4. On the shelf at the base corner, an area is outlined that needs to be cut out. In area it is equal to the depth and width of the groove in the rail.
5. Using a fine-toothed saw, you need to make a cut according to the markings and remove the unnecessary element.
6. Next, the shelves are ground and fit into the grooves is checked.
7. Using glue, the rail must be fixed to the wall, secured with tape and left for at least an hour.
8. Shelves are inserted into an already fixed rail without any other fixation.

In this simple way you can make shelving for the living room, bathroom, kitchen, etc.

To make a shelf using the second method, you must first make grooves, and only then take on the main element:

1. In two bars, equal in length to the size of the sides of the shelf, using circular saw grooves of the required width are formed.
2. These elements are attached to the wall using self-tapping screws or dowels. It is necessary to ensure that their caps are completely recessed.
3. The angle is carefully measured. The measurements are transferred to the material, where the outline of the shelf is drawn.
4. The element is cut out using a jigsaw or file.
5. A special tape is used to decorate the edges.
6. When the shelf is completely ready, it is inserted into the grooves.

Just a few hours, and a beautiful decorative element is already in place!

When creating a shelf with his own hands, the master takes into account everything: his ideas, the interior, the features of the corner, where this item will be located.

Problem free space is always relevant, especially for small apartments. What to do if you want to place your favorite books or children's crafts? Corner shelves will help out.

Almost always in the apartment there is an unoccupied free corner in which a rack or small shelf would be perfectly located. This will free up some space and also add a new decorative element.

Materials for making shelves

Today it is difficult to find a house or apartment that does not have shelves. They are convenient for laying out personal hygiene items in the bathroom, arranging books, flowers, kitchen utensils or small crafts and trinkets. The angular position provides great opportunities for design imagination when creating various shelf configurations.

Due to their design, corner shelves can save apartment space and at the same time aesthetically decorate the corners.

Today it is possible to choose a corner shelf on the wall for any room. Specialized stores are ready to offer a wide range of shapes and designs from various materials. But the cost of such shelves does not always suit every potential buyer.

Wooden wall hangings have a traditional and classic look. It can be made in a minimalist style, but will still remain attractive.

Shelves are often used not only to complement and decorate the overall interior of the room, but also for a clearer and more expedient organization of space. Thanks to their use, the apartment owner has the opportunity to conveniently arrange a huge number of small things that would simply get lost in closets.

Today there are a lot of products on the market various models which are made from different materials. They also differ in design.

You can choose not only products with classic design, but also ultra-modern designs.

But more and more often people prefer to make such interior details themselves. Wondering how to make a shelf with their own hands, they re-read a lot of literature and look through many catalogs.

However, this does not mean that self-production The shelves are complicated and it is beyond the capabilities of a person who does not have special skills. No, that's not true at all.

Familiarization with literature in in this case necessary in order to create a product with beautiful design, which will fit into general interior. Let's take a closer look at what kind of shelves there are.

Types of shelves

Any specialist will tell you that before you start creating a product, you need to decide for yourself what kind of design you want to get and whether it will be combined with the interior. And only after that you can start creating the product.

After all, for a house decorated in a classically styled style, it is completely unacceptable to use trendy and modern shelves. They will look extremely ridiculous.

The most popular and widely known subtype of shelves is the classic shelf. This is due to the fact that it is quite easy to install, and appearance, thanks to its simplicity, it seems refined and sophisticated.

Both open and closed shelves are used successfully. Closed products are most often used for decoration and installation in rooms decorated in more modern styles. Glass and sometimes plastic are used to construct them.

Open structures can be used both in modernly decorated houses and in apartments with a classic design. Over the past few years, this particular type of shelf has gained enormous popularity and is therefore gradually replacing the classic options.

IN small rooms quite often you can see corner shelves that have special way fastenings They are mounted on adjacent walls that are adjacent to each other. They are most often used in bathrooms, kitchens and utility rooms.

In addition to the above types of shelves that are mounted on the wall, there are suspended and floor-mounted structures. Hanging shelves are mounted in an unconventional way.

They are installed using cables and vertical racks, and attached directly to the ceiling. This mount looks quite unusual and original.

Floor structures are most often used in hallways. After all, hand-made floor shelves for shoes not only look beautiful, but also help you organize the space of a small hallway. At the same time, making them is quite simple.

How to make a simple shelf?

To create the claimed product, you should purchase or prepare some tools and materials in advance. As connecting elements, you can use whatever suits you best. But the most popular are ordinary screws, brackets and dowels.

Note!

For example, let's take a photo of the shelves with our own hands, which is presented below. It shows a product with the following parameters: width 250 mm, height 300 mm, length 1100 mm. For convenience, the manufacturing process will be divided into stages.

Stages of work

At the first stage, you need to complete the markup. To do this, you should lay the boards on a table or any other flat surface and transfer measurements from the drawings. The side walls must be exactly 268 mm high.

This marking is optimal because the side walls will be located between the two parts.

The second stage requires cutting the boards. To get smooth and neat cuts, you need to use a jigsaw. After cutting, you will end up with 2 fairly long pieces and 2 shorter ones.

At the third stage, you can begin processing the resulting workpieces. The resulting segments should be coated with a special protective varnish or stain, having previously sanded them.

Note!

If you only plan to paint the shelf, you can get by with treating it with a regular antiseptic primer. This way you will not only increase the service life, but also achieve a more uniform distribution of paint.

At the fourth stage of making a wooden shelf with your own hands, you begin to directly assemble it. The bottom board should be laid on a flat surface. Step back 8 mm from the ends of the workpiece and draw two lines parallel to the cuts.

2 points should be marked on them with a distance of 5 cm from the edge. At the marked points it is necessary to drill holes for self-tapping screws. The same manipulations must be done with the second workpiece.

After this, you should install the side blanks on the lower section of the board and secure them. Once you are done with attaching the side panels, proceed to install the top panel and secure it.

At the fifth stage, you should attach the brackets to the ends of the side panels, and make several holes in the wall for the dowels. After this, screw in the screws so that they protrude by 5 mm. And now your shelf is ready.

You can make acoustic shelves in the same way, but you need to take into account the size of the equipment itself. Measurements should be taken carefully, because if you make a mistake, the work will have to start again.

Note!

DIY photo of shelves

In order to rationally use space in small rooms, there is one pretty a good option– wall-mounted corner shelf. The possibilities of its application are very wide. For example, such shelves are often used for icons, books, various awards, and so on. Don't forget about the kitchen. Here such a shelf can be installed under a small TV. In addition, in the bathroom or sauna it allows you to store bath accessories. This option is beneficial primarily because it saves space. Corner shoe shelves are also quite popular.

As you can see, such furniture can be used in any room. The easiest way, of course, is to buy a corner shelf in a store, especially since there will be no problems with the choice. However, there is also Alternative option– make it yourself, from plywood, fiberboard, or even from scrap materials. This type of work does not require any special knowledge or skills. The main thing is to just want it and, of course, clearly understand what exactly you need.

Corner shelf - how to make it yourself

So, let's take a closer look at what we have here. possible options. First of all, we need to decide on the material. Corner shelves can be made from:

• plywood;
• drywall;
• window sill profiles;
• glass

In the latter case, it is better to trim the material in a workshop. After all, it is very difficult to do this yourself without the lack of appropriate skills. You will also need to purchase special holders. It is first recommended to draw a drawing of the shelf, according to which you will then begin installation. The assembly itself will not cause much trouble, because the material is already cut. The holders are attached to the wall using self-tapping screws. Don't forget that the shelf needs to be level, so you'll need a level.

Quite often, plywood, MDF or chipboard are used to make a corner shelf at home. You can pin them different ways– fit on the longitudinal one or fix it in the grooves of the transverse base. The first option is simpler, since there is no need to drill the walls.

First of all, we draw a drawing with exact dimensions. Next we need to cut out the shelf itself from the selected material. To do this, draw a circle on its surface and divide it into 4 equal parts. Here you will need a compass, a ruler and a simple
pencil. Next, cut out each of these 4 parts using a hacksaw or jigsaw.

After this, you need to take the base rail and mark it. In particular, it is necessary to indicate the size of the groove, as well as the location of the shelves. The most optimal cutting depth is approximately to the middle of the rail, no more. Next, we outline the area that we will cut out on the shelf itself - this is done at the base corner. It should be noted that its area should correspond to the width and depth of the groove we made earlier in the rail. Cutting in both the first and second cases is best done with a saw with fine teeth. We check how the shelf fits into the grooves of the base and, if necessary, eliminate flaws.

Next we need to fix the rail on the wall. This is done with glue. After this, it is better to additionally secure the rail with tape and wait about an hour. We need the glue to grip securely. During this time, you can start sanding the shelf itself. Here we need to make a small digression. If you are using untreated wood, then immediately before installation, all parts of the shelf must be coated with paint or varnish and wait until they will dry out. After this, you can begin installation. In this design, the shelf is simply inserted into the rail. No additional fixation is needed here.

If you chose the option with a transverse base, then the sequence of actions when assembling the shelf will be slightly different. In particular, first of all you will need to make the grooves, and only after that should you start working on the main element. So, we take 2 bars, the length of which corresponds to the size of the sides of the future shelf. We need to cut grooves in them to the width we need. The easiest way to do this is with a circular saw.

Next, we need to secure these elements to the wall using self-tapping screws. After this, we measure the angle and transfer the obtained values ​​directly to the material. On its surface we need to accurately draw the outline of the future shelf and cut out each element. The edges are decorated using a special tape. In fact, we have already reached the finish line. All that remains is to insert the finished shelf into the grooves.

A fairly popular material for making corner shelves is a PVC window sill profile. It’s worth warning right away that in this case it is necessary that the angle be truly right, that is, exactly 90 degrees. The thing is that adjusting this material to uneven walls is quite difficult. If the angle is right, then you will not have any problems making a corner shelf from a window sill profile.

We mark the prepared material and cut it out along the drawn contours. In this case, it is best to use a hacksaw. Next, we strengthen the rigidity of the edge of the workpiece by gluing there a wooden strip selected to size with pre- drilled holes under self-tapping screws. Here you can use any glue suitable for joining these two materials. By the way, you can fix the shelf on the wall using either self-tapping screws or carbon fasteners. Which option to choose is up to you to decide.

We have one more left unsolved problem. After all, one end of the corner shelf remains open and spoils the entire appearance. The problem can be solved simply - using a cable channel of appropriate thickness, mounted on glue. It should also be noted that our shelf will be white. Of course it's kind of universal option. However, many want something different color solutions. A special self-adhesive film will help us here. There are any colors on sale, so you can easily fit the shelf into the interior of the room.

In the interior of any room, be it a room, a kitchen or a bathroom, fixed corner ones look very harmonious. This element of furniture, with its simplicity, plays both a practical and aesthetic role. It can be used to arrange books in the living room, children's room or office, installed in the kitchen to arrange kitchen utensils, jars for bulk products or cute trinkets, or arrange convenient places in the bathroom for placing personal hygiene products and cosmetics.

Thanks to this design, you can rationally use space in small rooms, as well as smooth out corners. Such shelves, not being the main elements of furniture, will add emphasis to the interior design, effectively decorating it.

What materials are corner shelves made of?

Nowadays, stores have a huge assortment of different shelves, which makes it possible to perfectly match them to any room interior. Manufacturers offer products made from different materials, various designs, sizes and shapes. Despite this, many are not averse to making corner shelves on the wall themselves.

But in any case, you should know which materials are most suitable for the manufacture of such structures.

• Solid wood. This natural material has always been and will be very popular for the production of furniture, including shelves.
• and chipboard. They consist of recycled wood raw materials, to which formaldehyde has been added, and are well suited for the manufacture of cabinet furniture and its accessories, both in factories and at home. Surface finished products it is then covered with veneer or film.
• Metal. To make shelves, different profiles are used, from which racks and transverse load-bearing elements are made. Various polymer coatings are used to protect against corrosion.
• Glass. For such shelves, impact-resistant glass is used, and bearing structures made of metal.
• Plastic. Corner shelves on the wall made of this material are structures in which the transverse elements and racks are made entirely of polymers.

Corner shelves for the kitchen

When decorating a kitchen, such shelves are used not so much for decoration as for convenience. As a rule, they are placed above work surface taking into account the rules of ergonomics. The photo will reveal in full what the corner shelves hung on the wall look like.

They are L-shaped and can occupy only a corner or extend along the length of the wall. Often such an element, placed in the corner, connects hanging cabinets located on adjacent walls. For small kitchens, they are an excellent alternative to bulky cabinets and are used to place certain types of food, cookware and other utensils.

They can be made from all of the materials listed above, but more organically in kitchen interior An attached corner shelf on a wooden wall looks great, especially if the room is decorated in styles such as classic, Provence or country.

Corner shelves for bathroom

It's no secret that most bathrooms have small sizes, and the issue of saving space is very acute. But in this room you should conveniently place bath accessories, shampoos and shower gels, cosmetics and perfumes, as well as all kinds of detergents for washing and cleaning.

That's why different suspended structures are simply irreplaceable here. The best option- hang the corner ones on the wall. They go well with mirrors, look elegant and suit almost any bathroom decor. And if you consider that the humidity in this room is always high, then you cannot find a better material for shelves.

Although plastic shelves would be no less appropriate here. Their design consists of a stand, which is installed in the spacer between the edge of the bathtub and the ceiling, and four shelves with perforations (for water drainage). For convenience, the shelves are equipped with hanging soap dishes and hooks for washcloths.

Also in the bathroom you can hang corner shelves on a metal wall. Such structures are usually made of stainless or chrome-plated steel.

Corner bookshelves

Shelves for books are present in every home. On the one hand, they are very comfortable, and on the other hand, they complement the interior of the room well. The design of these structures is striking in its diversity and originality.

Corner shelves for the wall in the room are made in both classic and non-traditional versions.

But even classics can be somewhat unusual. Looks impressive wooden shelf, the elements of which alternately adjacent to one side of the angle, then to the other. The book surfaces have rectangular shape, rounded at the corners, and located at equal distances from each other.

Open shelves look more monumental. Usually, each side of such a cabinet is divided into compartments different widths, in which the transverse shelves are at different distances. Such corner shelves on the wall, photos of which are shown below, have a small depth, while remaining very convenient and spacious structures.

This type of shelves for a children's room looks interesting. They have an L-shape with the same length of transverse elements from the angle. But their highlight is that they can accommodate both books and toys, for which there are semicircular vertical compartments at the ends of the shelves.

Original corner shelves on the wall in a minimalist style are now very popular. They are made of wood. The base also has an L-shaped rather narrow shape, at the ends of which sides are installed as book holders.

How to make corner shelves yourself?

Since shelves are a fairly simple design, many people prefer to make them themselves. There are plenty of advantages to this. Firstly, you can really save money, and secondly, you can make it to your taste the desired design, which is ideally sized to fit into the required corner. And you don’t need any special knowledge, skills or expensive equipment here.

Corner ones can be made from any material, as discussed above. And having decided on it, you just need to select the right tools.

Glass corner shelves

If you decide to make a glass shelf, you need to prepare the following set of tools:

• glass with a thickness of at least 7 mm;
• pelican fasteners based on 2 pcs. for 1 transverse element;
• drill;
• glass cutter;
• grinder with a grinding wheel;
• building level;
• file;
• pliers;
• rubber hammer;
• polishing paste;
• tape measure, ruler, scissors;
• pencil (marker), cardboard for template.

Glass shelf manufacturing technology

The manufacturing process of such a shelf consists of several stages:

• Open the template. It is cut out of cardboard life size, slightly rounding the corner where it meets the wall. This will make it possible to install the shelf more tightly to the wall in the future.
• Glass preparation. It is cleaned of contamination using soda or detergents. Please note that for further work the glass must be at room temperature.
• Manufacturing of a transverse load-bearing element. Covering a flat surface with a cloth, place the glass on it. Having attached the template, the element is cut out with a glass cutter.
• Sanding the edges. Wear fabric gloves and, using a file dipped in kerosene (turpentine), clean the edges.
• Edge grinding. To do this, use a grinder and then polish the edge with a grinder and a felt wheel, using polishing paste.
• Installing a shelf on the wall. This requires a pelican mount. First, places for self-tapping screws are marked on the wall, then holes are drilled with a drill, dowels are hammered in, after which fasteners are installed and the glass shelves are fixed in them with special screws.

Wooden corner shelf

You can also make such a shelf yourself if you have some carpentry skills. The best material For its manufacture there will be chipboard, MDF or plywood.

To work you will need the following tools:

• saw with small teeth;
• electric jigsaw;
• drill;
• hacksaw and knife;
• compass;
• glue "Moment";
• slats to increase rigidity.

Wooden shelf manufacturing technology

A corner shelf on a wooden wall is made in the following way:

• a transverse element (shelf) is cut out of a chipboard board - a circle is drawn with a compass, divided into 4 parts and each is cut out with a hacksaw or jigsaw;
• on the rack-rack, places for each shelf are marked and grooves are made for the required recess, for this they use a saw and a knife;
• on each shelf, mark an area for a cut near the base corner, corresponding to the size of the groove; They also use a saw and knife for this;
• after this, the shelves are ground and checked for fit into the grooves;
• the rack-rack is attached to the wall with glue and tape and left for 1 hour for better adhesion;
• then insert the shelves into the grooves without additional fixation.

Knowing all these subtleties, making corner shelves on a wooden wall is not so difficult. This kind of work will take you several hours. A comfortable and beautiful shelf will serve you for many years.

Creating coziness and comfort in your home is a very pleasant experience. And if hand-made items are used in the interior, this brings a certain warmth to the home environment. Imagine, experiment, make your own decor - and you will bring joy to yourself and your loved ones.