Removing various types of hinged doors. How to remove a plastic balcony door How to disassemble a PVC door

Information on how to properly remove plastic will be very useful for every homeowner. balcony door from hinges. A similar need can arise in any home at any time. In order not to spoil the structure, it is important to know some rules for performing this work.

Plastic door hinges differ significantly from conventional door fittings.

Design Features

Plastic doors are installed almost everywhere today. In apartments and private houses they are part of the balcony block, and in public places and offices they perform the functions front door.

The design of the plastic doors themselves is not very different from ordinary ones. Here, too, the main parts are a box and a canvas attached to hinges. Their number is usually 3-4 pieces, which allows you to evenly distribute the load. The material itself combines polyvinyl chloride and a metal frame.

Door blocks are most often complemented by a glass insert, so be extremely careful when working. It is best to carry out dismantling and reinstallation with an assistant who will support the door and insure you.

The loops are located at an equal distance from each other. The upper and lower elements are attached along the line of the box. To prevent the fittings from attracting attention, camouflage plastic caps are placed on top of the hinges. So the design looks complete and neat. All fasteners are hidden under these linings.

Plastic doors are very popular and are used almost everywhere

When there is a need for dismantling

When might there be a need for dismantling? door leaf in a PVC balcony block? Basically, this situation is associated with repair work in the premises or the structure itself. For example, knowledge of how to remove plastic door may be needed in the following cases:

• Breaking. If any part of the fastenings fails or moves, the door needs to be adjusted. Sometimes this requires removing it from its hinges.
• Replacing a door or part. You may have to face a problem when you need to make complete replacement loops or fabric as a whole.
• Repair work in the premises. In order not to stain or damage the structure, you can cover the door with cellophane, but sometimes the best solution is temporary dismantling.
• Expansion of the opening. This refers to the situation of simply removing a door, for example, when moving furniture.

In any case, you need to not only carefully remove the canvas from the hinges, but also then be able to put it in place or install a new structure.

Most often, removal of the plastic door is required when carrying out repair work.

Rules for performing work

Let's look at how to properly remove a plastic door from its hinges. The whole process can be divided into several stages:

1. Removing the pads. First you need to open the hinges, that is, remove the protective caps from them. To do this, you need to close the door, but do not lower the handle down, and then pry the trim with a screwdriver and bend the plastic.
2. Disassembling hinges. In order for the mechanism to loosen, you need to press the loop in its upper part so that the protruding pin drops down. This way it will come out from the bottom. To completely remove the axle, grab it with pliers.
3. Removing the canvas. Grasp the canvas well and tilt it slightly towards you. Then lift the door up. The loops should come apart. Be careful, as the weight of the structure is considerable.

Reverse installation

When all the necessary operations have been completed and there is no longer any need for an empty opening, it is important to correctly install the door in place. To do this, you essentially need to perform all the manipulations described above, but in reverse order:

1. Insert the fabric into the opening so that you can put it on the hinges on top. The bottom loop serves as a guide, but it is important to maintain a level position to prevent distortions.
2. Place the bottom loop on the support pin and adjust the position of the remaining elements.
3. Place the door in the closed position without locking the lock. If you turn the handle, the blade will move and you will not be able to put the remaining loops on the axle.
4. Place the axial cylinders of all hinges in place and press the pins from below so that its edge goes up until it clicks. The edge of the pin should return to its original position and protrude about half a centimeter from above.
5. If necessary, tighten the hinges to align the door diagonally.
6. Put the decorative caps back on and check how the design works.

On-site repair

It is not always necessary to remove the door leaf when problems arise in the design. Modern plastic doors in a balcony block can be easily repaired on site. To do this, you need to turn to tools such as a screwdriver and a hex key.

First you need to remove the protective caps from the hinges. Pry them off with a screwdriver and bend them away. They may be the cause of poor door functioning. In order to correct this problem, sometimes it is enough to lubricate them. If a skew is detected, the position of the blade must be adjusted. To do this, you need to make the necessary adjustments in the hinges using a screwdriver or hex wrench. They have special holes hidden under the caps. With the help of such simple manipulations you can repair the structure with little effort.

In order to avoid problems with the door again in the future, you should lubricate its parts and correctly adjust the position of the door leaf. Periodically check the condition of the structure and correct problems as they are identified.

A plastic door is an attractive design that has many positive features. That is why it can increasingly be found as an entrance, balcony and interior design in houses. It is also distinguished by its practicality of use and low cost.

However, like any other, it needs high-quality care and timely repairs, and sometimes it needs to be removed from its hinges. This may be needed for various reasons - to disassemble, clean, decorate or check functionality.

Traditional fasteners

Attention! To understand the principle of removing a structure, you should understand what fasteners are on it. They may differ in appearance and design. Accordingly, the removal principle is also somewhat different.

Peculiarities

They are distinguished enough complex design. It is important to understand the principle of the device, which will allow you to remove it without any problems. The device is represented by the following components:

1. Metal tab. This component is often called the door part.
2. The frame part, which has built-in pins necessary for fastening.
3. Distance sleeve. It is located between the metal tab and the frame part.

Such components are able to ensure proper fit of the frame, while maintaining smooth opening and closing. If necessary, you can adjust the hinges in the required direction, ensuring more correct functioning of the lock or lock.

The adjustment can be made in two ways. One of them is horizontal. It is done using a loop template. The second adjustment method is vertical. It involves the use of adjusting screws, which are located under the decorative caps of the products.

From time to time, fasteners need lubrication. This will extend the service life, ensure reliability and strength. Based on the type of fastening, they are divided into overhead and applied options. Among the most popular are overhead options. They are also considered the easiest to remove. It should be understood that initially you should pay special attention to overhead models. This will allow you to purchase a high-quality structure that will be easy to remove and disassemble. To do this, you need to learn a little more about overhead models. They are used to install balcony doors.

The quality of the functionality of the doors themselves depends on the quality of the installed products. Very often, distortions occur, for which the hinges are primarily to blame, since due to the low level of production they have extremely weak characteristics and simply cannot withstand the weight.

A modern overhead hinge is classified according to GOST; they all differ in installation options, which affect the weight of the door leaf and the direction in which it opens. Various areas of application are possible. therefore, you need to pay attention to the characteristics that the manufacturer usually indicates when selling the product.

There are a number of points to pay attention to, including the following:

1. Sash and frame profile design.
2. The presence or absence of an amplifier.
3. Profile wall thickness.
4. The weight of the sashes and their dimensions.
5. Opening principle.

All these points should be taken into account so that the structure lasts a long time and there is no need to remove the canvas. Most often, the hinges are quite strong and reliable, due to the fact that they are made of Teflon. If the loop suddenly fails, there will be no difficulties in replacing it. For them, side cutters, pliers, a hammer, and a hammer are useful. Most often, removal of the structure is necessary if low-quality fittings were initially installed, they are faulty, or the door is broken.

When is dismantling required?

Dismantling may be planned or the problem may arise suddenly. Very often this is a breakdown. Certain fasteners, the door itself may fail, or it may require high-quality adjustment. In most cases, this will require removing the structure from its hinges.

One more common cause becomes the replacement of individual parts or installation new door. In these cases, unhinging becomes a necessity. Also among the reasons are renovation work in the house, in which the canvas significantly interferes, or the process of expanding the opening.

How is the work done correctly?

Disassembly involves removing the canvas. You should adhere to the work algorithm in order to achieve a favorable outcome of the dismantling process. There are three main stages in the process of removing the canvas.

The first step is to remove the linings from the canvas. To do this, open the hinges by removing the caps that perform a protective function. The principle comes down to the fact that the door is closed, leaving the handle raised up. After this, carefully pry the cover with a screwdriver to bend the plastic.

The next step is the need for analysis. To loosen the mechanism, press the hinges at the top, helping to lower the pin down. The axle can be completely removed using pliers. The final stage is the actual removal of the canvas. To do this, you need to grab it and tilt it towards you. Only after this is it carefully lifted so that the loops are separated. It should be borne in mind that the structure has an impressive weight, so you may have to work together.

After this, the need arises for subsequent installation of the structure in place. To do this, the canvas is inserted into the opening, putting it on the hinges, while focusing on the bottom one. It is put on the support pin and the position of the elements is adjusted. After this, the door is finally inserted into the opening, the axial cylinders are mounted, tightened and the decorative elements are put in their places. Finally, you should check the functioning of the canvas and fittings. If there are any shortcomings, the operation of the door leaf should be adjusted.

Attention! At first glance, it may seem that the removal process is unusually simple. However, it is not recommended to deviate from the instructions. It was developed by experienced professionals who know how to act so as not to damage the components and ensure the possibility of its subsequent normal installation in place.

Now you know how to do it yourself. This work does not require any special skills. Removal is a simple and accessible process for every person, and calling specialists is not required. The canvas itself will be removed extremely simply and without problems, especially if its installation was carried out correctly. If necessary, you can always pay attention to the video, which illustrates this process in detail. This will allow you to get rid of even possible difficulties and will guarantee the ease of the process itself.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your...

New articles

New comments

Grade

Grade

Grade

Grade

Grade

Latest reviews

It would seem that what is so difficult about dismantling a PVC balcony sheet? In practice, it turns out that without instructions on how to remove a plastic balcony door from its hinges, it is not easy to do the work yourself, especially for people without experience.

The seemingly simple design is quite heavy, so it will require a competent algorithm of actions during the dismantling process. To remove it from its hinges carefully, quickly and without the risk of damage, you need to know exactly which hinges you will have to work with.

Hinge options for PVC doors - components

The design of a balcony door, as well as a double-glazed window, is based on the use of fastenings - hinges. The main material for making loops is Teflon. Teflon products cope with the load, despite the impressive weight of the door leaf, guarantee smooth operation of the structure, and help create a tight connection with the door frame.

Each loop consists of several important elements:

• metal part No. 1 (mounted to the door);
• metal part No. 2 (mounted on the frame using built-in pins);
• spacer bushing (redistributes the load from the door to the frame).

The dismantling process has its own nuances, but the main rule is careful, coordinated movements without haste, according to the instructions.

How to dismantle a plastic balcony door leaf with your own hands: a guide

There is nothing difficult about removing a plastic balcony door while studying a video on a thematic channel. Step-by-step instructions will provide additional assistance. By following the recommendations, you can solve the problem of dismantling without having special skills, which will save on paying for the services of specialists.

How to remove a PVC balcony door with your own hands:

1. The door must be closed without closing the handle all the way.
2. On each side of the structure, it is necessary to remove the caps masking the hinge mechanisms using a screwdriver.
3. Dismantling begins from the top hinge. To do this, click on top part- a pin protruding beyond the loop.
4. Using pliers, pick up the cylinder at the bottom of the loop, and then carefully remove it through the bottom of the mechanism.
5. The door is tilted towards itself, easily pulled by the handle, taking into account the weight of the structure, preventing it from falling.
6. The blade is lifted up a few centimeters, releasing the cylinder in the lower support of the mechanism. The structure is ready for complete dismantling, since the hinges no longer secure it.

In the same way, you can install the product in place.

Installation of a PVC door - reverse order

After completing the repair and correction work, the plastic door must also be carefully put back in place. To do this you will need:

1. Insert the canvas into the opening so that it rests on the hinges at the top, avoiding distortions.
2. The lower loop is also placed on the support pin with all elements adjusted.
3. The axial cylinders of the hinges are mounted in place, after which the pins are manipulated in the reverse order of dismantling with pressure from the bottom up until a characteristic click is heard and they protrude outward by half a centimeter.
4. You can adjust the position of the door by tightening the hinges.

At the final stage, the decorative masking mechanisms of the hinges - the caps - are returned to their place.

What to do with rusted hinges?

Prolonged use of the door can lead to the formation of rust on the hinge mechanisms. In such cases, it is important to remove the fabric from the hinges without sudden movements.

Do not use a hammer or other tools to try to break the layer of rust on the fastening elements. Such manipulations will only worsen the situation.

The solution will be a special aerosol that can remove plaque within 6-12 hours after application. As soon as the mechanisms are cleaned, they begin to work with them according to the dismantling instructions.

When can you do without dismantling?

Problems with the functioning of the PVC door leaf do not always need to be solved by dismantling. Some problems can be resolved on site using simple tools- hex wrench and screwdriver.

To understand that the protective caps on the hinge mechanisms are not the source of problems, you need to start the repair by removing them (use a screwdriver). Often these details negatively affect the operation of the door. Simply treating the caps with lubricant can solve the problem of squeaking, tight closing and opening.

In case of distortion, it is necessary to correct the position of the blade directly in the holes of the hinges hidden under the caps, using a wrench and a screwdriver.

As a preventative measure, the structure needs to be lubricated from time to time and its position adjusted, to prevent the problems from worsening when dismantling the balcony door becomes the only solution.

Design modern apartments and houses increasingly began to involve the installation of metal-plastic or plastic door structures. But such doors require careful maintenance. From time to time it becomes necessary to dismantle them for minor repairs or adjustments. In order to do this as carefully as possible without damaging the structure, you need to know some features.

The structure of hinges for plastic doors

Hinges are an integral part of any plastic door. They have a more complex structure than their analogues wooden doors.

Advice! If you study and understand the structure of such a loop well, then the dismantling process door design it will become much easier.

The main components of the loop are:

1. Metal tab.
2. Frame with built-in pins. These pins are used for fastening.
3. The bushing located between the door part and the frame.

Thanks to this design, the hinges ensure a complete fit of the door to the frame. In addition, thanks to them, the door will close and open smoothly.

How to adjust the hinges of a plastic door?

In order for the lock on such a door to work as smoothly and without failures as possible, it is necessary to carefully adjust the hinges both horizontally and vertically.

Horizontal adjustment is carried out using a specialized template, which is a metal tab.
Vertical adjustment is carried out using screws, which, as a rule, are hidden under plugs that perform a decorative function.

To ensure that the hinges serve you well long time, they need to be lubricated from time to time.

The main types of hinges intended for plastic doors

Depending on the type of fastening on the profile, the following types of loops are distinguished:

1. Applied. This type is most often used for pendulum-type structures. Such structures are usually installed in high traffic areas. Hinges of this type can also serve as a door closer, meaning the door will close on its own without additional effort.
2. Invoices. During their installation, special attention should be paid to ensure that the location of the fastener in the loop clearly coincides with the installation location of the metal amplifiers, which are located in a plastic case.

Advice! Overhead hinges are best installed on doors leading to the balcony.

How not to make a mistake with the choice of loops?

In order to correctly select high-quality hinges for a plastic door, you must consider the following:

1. Is there an amplifier in the profile?
2. Type of design of sashes and profile frames.
3. The value of the wall thickness of each profile.
4. Weight and other parameters of the sashes.
5. Door opening mechanism.

Hinges intended for plastic doors are made of Teflon. This material provides them with durability and reliability.

How to properly replace hinges?

Even if you correctly took into account all the nuances when choosing hinges, unfortunately, no one is immune from manufacturing defects. Therefore, there may be a need to replace the hinges. To do this you will need the following devices:

1. Pliers with narrow jaws.
2. Punch or hammer.

Each set of hinges is always accompanied by detailed instructions, describing their design and installation features. Before starting work, it is necessary to study it.

In order to dismantle the plastic door leading to the balcony, you will need to perform the following operations:

After the door is removed, you can proceed to replacing the old hinges with new ones. To do this, you must carefully follow all the provisions of the instructions attached to them. After replacing the hinges, you can return the door to its place. To do this you will need to perform the following operations:

1. To do this, you need to lift the door and place it on the pins in the supports.
2. After this, a spring should be inserted into the pin bottom loop. The door must be kept slightly open.
3. The axial cylinder must be installed in the lower hole of the hinge.
4. By gradually pressing on the cylinder from bottom to top, it is necessary to ensure that it comes out of the loop structure. Make sure that the size of its protruding part does not exceed 5 cm.
5. The final stage of installation will be the installation of decorative caps.

What stages does the dismantling of a plastic entrance door include?

Entrance doors are much heavier and stronger than interior and balcony structures. Consequently, the process of removing them will have some features. For the front door, as a rule, specialized reinforced hinges are used, which are equipped with protection against burglary.

Three hinges are installed on the front door. They have to hold on enough heavy weight door leaf, so the hinges must be very reliable and of high quality. You should not use cheap models, as they can break down very quickly.

The metal-plastic construction is practically no different from the plastic one. Therefore, the process of dismantling it will not differ much from that described above.

The only difference between dismantling the front door is that it is physically impossible to perform this operation alone. The door is too heavy for one person to hold. Therefore, when starting work, make sure you have an assistant.

Almost every room has plastic doors. They are popular because characteristic features And low price. The installed model requires maintenance, and in some cases the canvas must be dismantled. Before removing the plastic entrance door from its hinges, you need to familiarize yourself with step by step instructions for its dismantling.

The difference between the models is the material used for their production. Previously, the canvas was made from ordinary plastic, now it is used polymer material, for improved sound and heat insulation.

Used to make the frame metallic profile, withstanding heavy loads. Corner elements reinforced with metal brackets, which makes the model more reliable.

Where are plastic entrance structures installed:

• entrance to a private house;
• exit to the balcony;
• shops, kiosks;
• office rooms;
• separate room in a large warehouse;
• industrial premises.

Attention! Metal sheets are mounted into the entrance models.

Entrance structures made of plastic are heavy. Therefore, rigid hinges are installed on them, which can be made with the addition of Teflon.

They are divided into the following types:

• removable;
• fixed;
• screw-in;
• card;
• invisible.

The loop consists of the following components:

• a part that is attached to the opening part;
• a frame part having pins;
• bushings that transfer the load from the canvas to the box.

The plastic model contains the following elements:

• lock;
• pen;
• rubber seal;
• closers;
• bolts.

Threshold plastic construction can be framed, reinforced or aluminum. Depending on the type, it has different purposes.

Design

If you need to remove a plastic door from its hinges, you should know its design. The following types of plastic models exist:

• swing - opening and closing is carried out using the standard method;
• pendulum - opens in one direction or another;
• carousel - going in a circle;
• sliding - moves only along the installed guide;
• sliding - the product goes into a niche in the wall;
• lever - used in the garage, warehouse;
• accordion door.

There are combinations where PVC is used with inserts of glass, aluminum, and steel. Many models are made with a metal frame, and also include locks and fittings. There are display glass inserts. The decor is made using dyeing or lamination.

Door removal instructions

To service the doors, it is enough to lubricate the mechanisms - no dismantling is required. However, there are cases when you can remove metal-plastic door from loops is a necessity:

1. Parts need to be replaced. To replace parts or accessories, remove the canvas.
2. Mechanical destructive impact (for example, the canvas is cracked).
3. Indoors goes major renovation. The doors are removed for safety.
4. Installing new furniture or removing old furniture from the room so that the door does not interfere or get damaged.

Door hinges are a mechanism that must be handled with care. Dismantling is carried out according to the instructions:

1. Remove the cover from the hinge at the bottom and top, remove the protective caps. To perform this procedure carefully, the canvas is pressed against the box, but not closed. The cover is removed by slightly prying it with a flat tool.
2. To loosen the loops, press at the top on the pin that secures them. He goes down. It must be picked up with a tool and pulled out - pliers are used for this.
3. After the pin is pulled out, the hinges are released and the doors can be removed.
4. The structure is tilted towards itself and raised. If everything is done correctly, then the hinges are disconnected and the canvas can be removed freely.

The weight of the canvas is large. This must be taken into account when removing it in order to correctly calculate the applied force and not drop the door.

Required Tools

For dismantling you need the following tools:

• set of screwdrivers - figured, straight;
• hex keys;
• pliers or pliers;
• finisher;
• crowbar

When working with tools and plastic, you must be extremely careful and act in stages. By applying brute force, you can break the canvas - then it will need to be completely replaced.